World Printmakers’ Print Workshop Central

Online resources for fine-art printmaking workshops

Forum – For Sale

with 509 comments

Want to buy or sell an etching press or a workshop? This is the place to announce it.

Written by Michael Booth

June 2, 2008 at 11:34 am

509 Responses

Subscribe to comments with RSS.

  1. Copper plates and Etching paper for sale, San Diego CA
    Rives, German Etching, Murilliio
    Rod 619 561 5584

    Rod Lingren

    June 21, 2008 at 6:17 pm

    • Interested what do you have??What kinda of deal?? thank Stephen

      stephen Duffy

      March 17, 2011 at 7:15 pm

    • What size is the Rives? Are we talking Rives BFK heavyweight?

      Catherine Ruane

      December 24, 2011 at 7:16 am

    • Hi

      Interested,what do you have..plate size? I am a printmaker…

      Stephen Duffy

      April 26, 2013 at 6:44 pm

      • Hi Stephen
        Go to craigslist, Vancouver (canada), Arts & Crafts Section so Search for: Eching press motoarized . pics are there with dimensions of rollers
        Tomi

        Tomi

        April 26, 2013 at 7:36 pm

    • IM LOOKING TO BUY USED OR NEW BRAYERS , contact me at plioplyte.monika@gmail.com with some phone pictures and price.

      Monika Plioplyte

      October 30, 2014 at 4:46 am

  2. We have downsized and moved. Surplus equipment
    2007 model TMI jaguar 36″x48″ parallel lift one arm screen press, requires air, 110v, in great shape, very modern large format. $10,000 OBO
    Older Solar 360 prototype vacuum exposing frame, approx 60″x80″ rotating model, works with conventional lamp or sun, $2800 OBO
    52″x52″ 50 leaf drying rack, used, ok condition, $500

    Buy all and we can make a deal. Delivery and setup negotiable. all prices FOB Courtenay, Vancouver Island, Canada – do not include crating

    see the press vid at http://www.tmiscreenprinting.com in ‘news’ ph 250 334-2598 9am-5pm westcoast time or email andy AT squeegeeville.com

    Andy MacDougall

    October 7, 2008 at 4:40 pm

  3. oh hai!

    We have a brand new 47×57″ fluorescent UV tube vacuum exposing unit with floor stand sitting at our factory in a crate. the customer had a fire and can’t take it.

    this is located in Mexico and ready to go, wired for 110v

    Regular $3125, offered for $2500 plus shipping.

    See it here: http://www.tmiscreenprinting.com/products/eagle-fluorescent/

    andy AT timiscreenprinting.com

    ALSO: I have 4 – 48×48 OD heavyduty aluminum stretch and glue frames – they won’t fit my new exposure unit or press. Some are ripped, some have half decent 225-250 mesh. $70 ea.FOB my studio, does not include freight or packaging for shipping.

    ALSO: large newman roller frames (maybe 48×48″ or so) Some friends of mine in Langley BC (outside of Vancouver) ended up with quite a few – they have other sizes of regular frames too, they will sell them cheap. contact http://www.monsterpress.ca ask for Marty tell them andymac sent you!

    Andy MacDougall

    December 6, 2008 at 4:41 am

  4. All the above have sold. We took in trade an older 3×4 one arm clamshell vacuum table, probably a cinicinatti, looks to be in decent shape,
    a rotating Polycop vacuum exposing frame about 39″x 50″,
    a smaller 50 leaf drying rack maybe 32×48.

    All this is located in Victoria, make me an offer.

    andy AT tmiscreenprinting.com i can send some pictures.

    andy macdougall

    February 21, 2009 at 9:43 pm

  5. Hello,
    I’m not sure if this is appropriate for this website, but here goes. My father, the artist David Larson, died 2007. I am liquidating art materials for my mom and among the items is a Martech Etching Press. This is a manual press that he dabbled with but did not use much. On the side is a plaque that reads, “This press was made for Alan Cutcliffe”. The company is out of business and this is one of only websites I’ve found that deal with such things. We are curious as to the value of this press and would appreciate any suggestions on finding a new owner.
    Thank you. Anders Larson

    Anders Larson

    March 28, 2009 at 1:25 am

    • I am interested in puchasing your Martech press.I don’t know the value.It was designed by Joe Martin in Bayside NY.I grew up with his daughter and we used to deliver them all over NYC.

      Jeri Parrott

      October 21, 2009 at 6:41 pm

      • I have a Martech Press for sale. I am in Long Beach NY. The pressis motorized . The bed is 37″ x 52″

        Reina

        March 2, 2011 at 4:57 pm

      • Interestedin the Martech. Are there pictures?

        Claudia

        July 23, 2011 at 8:00 pm

    • I am a Maine resident and would be interested in seeing your Martech press, and possibly buying it. What size is the bed?
      I’ve been looking for a press for a long time.
      Thanks

      georgina Grenier

      November 15, 2009 at 5:59 pm

    • Please could you let me know if you still have the Martech etching press available?
      Thank you

      Georgina Grenier

      Georgina Grenier

      November 15, 2009 at 6:18 pm

    • Do you still have the press?

      Mr Larson

      December 8, 2009 at 10:25 pm

    • Hi – I see by the date that you posed this a while ago, but do you still have that Martcech press and if so – what size is it (bed dimensions), where is it and how much do you want for it?

      john

      October 2, 2011 at 2:44 pm

      • Hi John,
        I am reina’s son. Yes – Press is still avaliable.
        The bed is 37″ x 52″. It is in Long Beach, NY

        Jordan

        November 16, 2011 at 12:26 am

    • DO YOUE STILL HAVE THE ETCHING PRESS FOR SELL.? let me know .

      helio salcedo

      December 24, 2011 at 3:16 am

    • DEAR ANDERS: I DONT KNOW IF YOU HAVE ANYTHING AVAILABLE BUT IM INYTERESTEDMAY I CALL YOU? MY E MAIL IS mxsourcerfk@gmail.com , MY NAME RICARDO FLORES

      RICARDO

      April 30, 2012 at 11:45 pm

    • hello…I have no idea of the value of the press but would be interested in the price and would you consider shipping to Australia…warmest regards jude

      judy olney

      June 2, 2013 at 12:42 pm

    • Hi,
      I’m assuming this press is long gone and you just forgot to take down the ad, but if not, I am an artist desperately looking for an etching press within my very small budget.
      Please let me know, one way or the other. Thanks.
      dk

      davidkachel

      September 20, 2013 at 12:14 am

  6. Dear Anders,
    Where is the press? Can you send photos? What size is the bed? Thanks.
    Sincerely,
    Greg Olsen
    Calgary,AB

    Greg Olsen

    March 31, 2009 at 6:48 am

  7. Greg,
    The press is in South Penobscot, Maine. I will be there in a few weeks and can get the measurements. If there is any measurement besides the bed size that you want, let me know and I’ll get it. If there are any other dimensions or information that you’d like, please ask. This is definately not my area of expertise.
    Anders

    Anders Larson

    April 2, 2009 at 3:21 am

  8. Would also like to know the size of the roller and pressbed, if it has a gearbox on the side, and any idea of price, plus some pix. Thanks.

    Steve H.

    May 19, 2009 at 9:39 am

  9. Greg,
    I will be visiting Penobscot on the weekend of June 6/7 and I’ll photograph and measure the press and pass this along to you. Thanks for your patience, I thought I would have gone there by now but plans changed.
    Anders

    Anders Larson

    May 23, 2009 at 6:18 pm

  10. Martech Etching Press update:
    Sorry for the delay, but here are some numbers.
    Large laminating plate is 17″ by 32″ by 3/4″
    The top roller is 16″ by 5 1/2″ diameter
    Bottom roller is approx 4″ diameter
    The crank arm for the gearbox is 7″
    I also have three 17″ by 32″ felts, 2 large tubs, 4 containers of etching ink, and a collection of etching tools. I have several photos and will send them to you upon request. My email is alarson@sanford.org. I am still trying to find a fair value for the press, and I welcome suggestions.

    Anders Larson

    June 13, 2009 at 3:02 pm

  11. All of the above screenprinting equipment I listed has been sold. thank you!

    andy macdougall

    July 24, 2009 at 6:54 am

  12. Hello,

    I have the press of my late husband for sale.
    It’s a DICKERSON COMBINATION PRESS,
    motorized, model 002,
    Press printing bed is 27″ x 48.

    It sits on a metal table about 2ft of the ground. it looks exactly like the one here – 4th pic on the bottom :
    http://www.chicagoprintmakers.com/docs/facilities/facilities.php

    I have all the leather rollers, plus even color pigments.
    If any of you could guide where I can find out it’s value I’d greatly appreciate it.

    Thank you so much for your help,

    Gabriele

    Gabriele Pallin

    September 17, 2009 at 1:41 am

    • Sorry the above measurement are incorrect.

      DICKERSON COMBINATION PRESS,
      motorized, model 002,
      Press printing bed is 28″ x 64″.

      Gabriele Pallin

      September 18, 2009 at 4:57 am

      • DID YOU EVER SELL THIS PRESS?

        DEBORAH GOODMAN

        October 7, 2009 at 3:39 am

      • Hi Gabrielle,

        Did you sell this press?

        Thanks,
        Gene

        Gene

        August 26, 2010 at 5:25 am

    • Did you sell your press?

      ann

      October 26, 2009 at 4:33 am

    • Please could you let me know if you sold this press

      Thanks

      Georgina Grenier

      November 15, 2009 at 6:06 pm

      • Hello,
        I have noticed that you are looking for Martech etching press. We have one that we would like to sell: 21 x 44 in . printing bed 21 x 44 in.
        If you are interested I will send you photos.

        best wishes

        Gregory

        Gregory

        November 25, 2009 at 1:11 am

    • Is the Dickerson combo press still for sale & where is it located if so…I live in the NY area…

      Jim

      January 27, 2012 at 7:04 am

    • HELLO , WOULD YOU STILL HAVE A PRESS FOR SALE? PLEASE CONTACT ME

      RICARDO

      April 19, 2012 at 1:15 am

    • DEAR GABRIELLE:
      I WAS WONDERING IF YOU WOULD HAVE ANY OF THE EQUIPMENT STILL FOR SALE
      PLEASE COMMENT
      RICARDO

      RICARDO

      April 30, 2012 at 11:55 pm

  13. I just got a notification about this in my e-mail; where are you located and how much?

    best wishes

    Georgina

    Georgina Grenier

    December 15, 2009 at 2:20 pm

    • Dear Gregory,
      Did you sell your 21 x 44 in Martech etching press? If it is still available, how much are you asking for it? How much does it weigh? (I live in CA.)
      Sincerely,
      Kathleen

      Kathleen Biersteker

      March 21, 2010 at 4:50 am

      • HELLO ! WOULD YOU HAVE AN ETCHING PRESS FOR SALE?
        RICARDO

        RICARDO

        April 19, 2012 at 1:16 am

  14. Fine Art Printmaking Shop Equipment for Sale – Equip your studio!
    December 24, 2009, need to sell ASAP

    ELEPHANT ETCHING PRESS for sale. Create original prints! Bed size: 30 by 52 inches Excellent condition.

    Elephant Etching press, treasured art studio equipment, use to create etchings (intaglio), monoprints, collographs, block prints, all kinds of artwork requiring pressure and a large bed surface.

    Drying Rack-50 Shelves, Drying Rack size 42″ x 50″

    Water Table – top size 40″ x 52″ height 37″
    (fill with water, hose attached,) Table has screen that fits snugly into lip to allow soaked paper to drip off excess water. Shelf underneath holds lots of etching and monoprint supplies, also hot plates, chemicals

    Printmaking Supplies

    Everything you need for a printmaking studio! Create great artwork as a profession or hobby. I used this equipment to make art in a successful business. Would be excellent for use in a school or University. This equipment will last you a lifetime.

    I am a recent cancer survivor. Due to foreclosure and needing to move immediately I am unable to keep my treasured art studio equipment.

    I hope to get a good offer on this equipment. I am selling the whole studio as a package deal. I’ll take the best offer. I will send you specs and details on the equipment and photos of the etching press, drying rack and water table. Please send a request to sarahdeesart@mac.com
    and provide an Email address where I can send the information.
    my web site is http://www.sarahdees.com
    Thank you!

    Sarah Dees

    December 24, 2009 at 4:47 am

  15. I’m looking for a used etching press. I live in CT. Does anyone know where I can find one?

    Rebecca F

    January 31, 2010 at 11:23 pm

    • Hi Rebecca, I have a Dickerson combination press that is motorized, it has hardly been used. If you are interested give me a call and I will give you the particulars. I am in Westchester NY 914 316-6156

      Thanks, Noel D

      Noel DeGaetano

      April 9, 2010 at 8:30 pm

      • Hi Noel,

        Just came across this…Is your press still for sale?
        Please let me know details. I’m also in CT.

        Thanks,
        Gene
        203-788-9803

        Gene

        August 25, 2010 at 4:15 am

    • I have a Martech etching press, motorized, bed size, 37″ X 56″. I live in Nassau County in NY. Are you interested in the press?

      Reina

      December 20, 2010 at 3:49 am

    • I have a Martech with a 37″ x 52″ bed. Please let me know if you are still interested in this press. Thanks, Dave (516) 376-1600 davescyberstore@aol.com

      Dave

      January 9, 2012 at 1:21 am

    • Moving and can’t take it with me. I have an Ettan Etching Press with Felts for sale. Bed is 36″ x72″. Also selling 2 largest sized Industrial Hot Plates, 2 custom made fiberglass sinks ( one for paper soaking. And one deeper for soaking or clean up)with all pipes and generator for installation, large soaking tray and a vertical soaking tray, halogen studio/ gallery ceiling lighting, large work table and a couple of 42″ flat files.
      Please send inquiry to ronnagilbert@gmail.com. Will send images and prices

      Ronna Gilbert

      January 3, 2014 at 2:54 am

      • i would love to have that press, do you have pictures and a price?

        adam weber

        February 7, 2015 at 8:22 pm

  16. I have a 36 x 60 motorized Laguna etching press for sale. $6,000, obo. 110 v Includes a mixed set of blankets. (Not all full size.) Prints well. I have retired, and am giving up my shop, so I need to sell the press, along with a 69×45 drying rack with 50 spring loaded shelves. $1,350. All Located in the Olympia, WA area.
    Larry Taylor
    eltay3@yahoo.com
    360-229-3952

    Larry Taylor

    February 11, 2010 at 1:16 am

  17. Ettan MS-3 etching press, 1 owner, private studio, 24 by 48 inch bed, in good, clean condition. This manual press includes a captain’s wheel instead of a handle or starwheel, so is much easier on the wrists and back. Fairly lightweight at about 280 pounds makes this press transportable. $2800> Buyer assumes all shipping & crating costs

    J Hasenfratz

    February 28, 2010 at 2:14 am

    • Where are you located and can I see an image of your press and equipment? Thank you!

      melanie yazzie

      March 12, 2010 at 12:17 am

    • Hi, I am selling a Large Ettan… the floor model… the press you have for sale is actually the one I wanted… want to swap??? ha! anyway, just wondering if you have sold it yet… if not, and if I get lucky enough to sell my own… I Would be interested. `Anthony

      Anthony DiMichele

      March 17, 2010 at 12:42 pm

    • Where are you located? I am in Monterey CA

      Kathleen Biersteker

      March 18, 2010 at 8:20 pm

    • Where is the Ettan MS-3 etching press located? I am in Monterey CA

      kathleen biersteker

      March 19, 2010 at 5:33 am

      • Where is the Ettan press located?

        Lorraine

        April 12, 2010 at 6:30 am

    • Is the press still available? Where are you located?

      Alan Vlach

      April 15, 2010 at 5:16 pm

    • Do you still have this press available? It’s been a long time since I checked out this web site. Just wondering if you still do and where you are shipping from?

      Rebecca Fettig

      October 18, 2010 at 3:32 am

    • GOOD AFTERNOON , DO YOU STILL HAVE YOUR PRESS ? PLEASE COMMENT MY MAIL IS m,xsourcerfk@gmail.com PLEASE WRITE

      RICARDO

      May 1, 2012 at 12:24 am

  18. I have a large floor model Ettan Etching Press in great condition. Its bed is 36″ x 72″. It has 2 good blankets, a plexiglass bed cover.
    It is simply too large for my studio. It cost 8000$ new, and I am asking 4500$ plus all shipping and crating costs.
    If interested leave a reply. This is a great deal for anyone with a large studio, or who runs classes. It is a primo press. Also, it requires double door to move it into a room.

    Anthony DiMichele

    March 17, 2010 at 8:51 am

    • Hi Anthony,

      Is this press still available? Where is the press located, and what is its weight? Any other details, pix?

      Thanks,
      Gene
      emarinoiii@gmail.com

      Gene

      August 25, 2010 at 4:17 am

    • Hi Anthony, I just saw your ad for the large floor model ettan press, did you sell or it trade yet? Where are you located, I’m interested. Thanks. please reply to : ron.garrett@pinecrest.edu

      Ron Garrett

      November 28, 2011 at 5:00 pm

  19. I have a Rembrandt Etching press. Press bed is 24×42. It is newly refurbished. It is bolted to a hardwood table with shelf on wheels. I will sacrifice for $3200. My email is debbiepatten7@yahoo.com if interested. thanks

    Debbie Patten

    April 11, 2010 at 5:54 am

    • Where are you located?

      Lorraine

      April 12, 2010 at 6:29 am

      • Hi Lorraine, If you are asking about the Dickerson Press, I am locvated in Westchester NY

        Noel DeGaetano

        April 12, 2010 at 3:51 pm

    • Do you still have this Rembrandt press?

      Rebecca Fettig

      October 18, 2010 at 3:34 am

  20. thanks Noel…i live off the West Coast of Canada…

    Lorraine

    April 12, 2010 at 4:04 pm

  21. I am looking for a good quality small/medium sized press for monoprints. Tabletop press would be ideal. I need one that has good control so that the pressure is even. I am located in San Diego. If anyone knows of one please let me know. Thanks!

    Sharon

    April 17, 2010 at 1:57 am

  22. I am looking for a good quality small/medium or tabletop printing press for monoprints. I am in San Diego area and am looking for a reasonably priced press with in good condition with good control. I am in the San Diego area. If anyone has what I am looking for please contact me. Thanks!

    Sharon

    April 17, 2010 at 3:16 am

  23. I’m searching for a large tabletop or medium standing etching press in excellent condition. I’m in the Seattle area, but would willingly pay shipping costs for the right press. Thanks.

    Kristi

    April 18, 2010 at 6:52 am

    • Hi, I just popped a posting regarding a Glen Alps printing press that my mother-in-law, a retired artist, wants to sell. I’m not sure if that is what your looking for, but these are rare presses and it is an etching press. The measurements are as follows: the metal bed is 30 by 66 and the wheel’s diameter is 18in. It is heavy and orange and metal. I think it would be typified as medium, but I’m not an artist, so apologies for any errors. She is asking $5,000 or best offer. Thanks, Elizabeth

      Elizabeth

      April 23, 2010 at 8:14 pm

      • I think it would be too big for me. They are supposed to be great. Where is it located?

        Thomas Potts

        April 23, 2010 at 9:08 pm

      • HELLO ELIZABETH , IM LOOKING FOR A PRESS , WOULD YOU STILL HAVE YOURS? BEST REGRDS

        RICARDO

        May 1, 2012 at 12:30 am

  24. Hi Kristi, I have a Dickerson combination press, it will print etchings, monoprints and lithographs. The bed is 27×46″ and it is motorized. It is in great condition – send me your email and I can send you some pictures of the press. I would like to get $2,700. for it. 914 316-6156

    Thanks, Noel

    Noel DeGaetano

    April 18, 2010 at 2:39 pm

    • HELLO NOEL , WOULD YOU STILL HAVE THIS PRESS? PLEASE COMMENT

      RICARDO

      May 1, 2012 at 12:32 am

  25. I have an Ettan Etching Press, MS-3 for sale.

    $2,000.00 Welded steel stand,blankets, brayers, etc. included.

    Located near Medford, Oregon

    Stacey Dawkins

    April 18, 2010 at 7:38 pm

    • Hi there… about the Ettan. I live on Vancouver Island. How much does your press weigh? and do you know the dimensions of it? thank you. Lorraine

      Lorraine

      April 18, 2010 at 10:14 pm

    • Hey, I live in Marblehead, Ma. Looking for a good etching press. Not to be big or small. Need blankets – rollers – setting up studio. Thanks, Connie

      Connie

      April 23, 2010 at 5:02 pm

    • Stacey, Could you send pictures & history. Thanks, Connie

      Connie

      April 23, 2010 at 5:05 pm

    • HELLO STACEY , WOULD YOU STILL HAVE THIS PRESS? PLEASE COMMENT MY MAIL IS mxsourcerfk@gmail.com

      RICARDO

      May 1, 2012 at 12:34 am

    • Four years later, I have my doubts that this is still available. However, if you still have it pls call 541-601-4636.

      Steve Preston

      April 23, 2014 at 11:13 pm

      • I have a professional pragga printing press (flat bed) with 5′ by 33″ bed (you need about 8×15′ of working space) Location. Toronto

        Sam

        August 26, 2014 at 3:14 am

  26. I am looking for a small to medium etching press located on the east coast. I am in Asheville, NC, have truck, will travel. Thanks for your time and consideration.

    Thomas Potts

    April 18, 2010 at 11:55 pm

    • Thomas , I know someone in Nashville TN selling a small table top press, apprx 13″ x 24″ press bed .
      Good condition but needs new blankets . Asking $750

      Mike M

      January 30, 2014 at 10:42 pm

      • id buy that right now…please let me know, id also love to see a picture before i make that drive

        adam weber

        February 7, 2015 at 8:24 pm

      • AT Adam Weber ,, not sure how to reach you,
        contact me through my website if you can bluefigeditions.com
        or email me directly to mike@bluefigeditions.com

        Mike

        Mike

        February 8, 2015 at 6:12 pm

    • are you still in asheville? did you find a press? i have a charles brand 16 x 30 and one interested artist — i am trying to find a fair price for this press which i wish i could keep, but i am older now and do not want to leave my daughter with this heavy equipment — i got it in the 70’s and used it for monoprints and a few editions — with my age and the fact that someone tossed out all my expensive inks, and that my stamina is not too great any more i would like to sell my much loved press — it has precision gauges, steel bed and rollers and has been up until i stored it at my house, well maintained by a serious artist (porge buck) who proofed a set of plates for me on it — write if still in asheville and still looking and i will give you my phone # — jean wall penland

      jean wall enland

      July 13, 2014 at 4:02 pm

      • Jean, I’m in Kentucky and interested in learning more about your press if it’s still available.

        Julie

        August 26, 2014 at 7:40 pm

      • Do you still have your press for sale? I am in western NC, but can travel wherever. Thanks, Robert

        Robert Triplett

        November 2, 2014 at 2:15 am

  27. I am looking for a medium sized gently used manual etching press (vintage, or newer) press and live in Maine. Can pick up in New England, New York area. Anyone have one to sell?

    Jann

    April 20, 2010 at 6:59 pm

    • Jann,

      Have you had any luck locating a press? I don’t know where you live but if it was close enough, would you consider going in on a press?

      Thanks

      Alan Vlach

      May 25, 2010 at 1:15 am

    • i have a martech press, 32 x 51 good condition, i am semi-retiring,, long island ny

      esteban

      August 26, 2010 at 1:10 am

      • hi esteban,
        is your press still available? if so how much are you asking for?
        thanks.
        fumi
        p.s i am in nyc

        fumi

        November 4, 2010 at 9:03 pm

      • Can you tell me what price you sold your press for?
        I have one and don’t know the value.
        Thanks

        Rob

        May 11, 2016 at 1:39 pm

  28. Lorraine: Bed: 24″x48.75″x.75″.Upper roller 6″ diameter. Without the stand it weighs 170 Lbs.

    Stacey Dawkins

    April 20, 2010 at 7:38 pm

    • who is the manufacture ? Where located? How much? Thanks, Tom

      Thomas Potts

      April 20, 2010 at 8:05 pm

    • Hi Stacey;

      Thank you for your reply. We have a few questions:

      1. How old is the press? Are you the original owner?
      2. What condition is the bed in?
      3. Why are you selling it?
      4. How much was it used?
      5. Do you think we could get in in the back of a pickup truck?

      Lorraine

      April 21, 2010 at 4:32 am

    • Is this press still available? How much?

      Travis Grant

      February 19, 2011 at 5:23 am

  29. Tomorrow, I am Going to look at a Sturgus C4 Press, It is not complete. Any suggestions on how to evaluate condition would be appreciated. This is my first effort to buy a press. Thanks,

    Thomas Potts

    April 20, 2010 at 8:11 pm

    • Still Seeking Small to Medium Etching Press on East Coast. SE preferred. Thanks,

      Thomas Potts

      April 23, 2010 at 4:32 pm

  30. Hi Lorraine,
    I had the press made at Ettan in San Diego in 1993.
    I used the press from then to currently.
    I’m selling it because I’m “Old, weak and feeble” and down sizing. ( It’s a great press)
    Yes, you can get it in a pick up easily, bed included.
    Stacey

    Stacey Dawkins

    April 23, 2010 at 1:35 am

    • Hi Stacy,
      Have lined up freight rates, have you sold your press?
      Thanks,

      jann

      April 23, 2010 at 6:35 pm

  31. Hi Stacy,
    If you haven’t sold your Ettan Press, I’d like to know if you might sell it if I arranged shipping… I have started into searching freight rates for 170 lbs. Can you estimate the weight of the other items you’re including?

    Jann

    April 23, 2010 at 2:52 am

  32. Hi Tom — Check ebay, there is a great seeming med/small press currently at auction. It is located in Florida. Good luck.
    Jann

    jann

    April 23, 2010 at 5:08 pm

    • Thanks, But not what I am looking for. I am looking for a standard etching press, 2 rollers, prefer at least 4″ top roller. Size over 12″. Table Top would be fine. Not to exceed $3,000 price dependent on manufacture, size, condition. etc. This will be our first, want to buy one that we will be happy with for a long long time. Best Tom

      Thomas Potts

      April 23, 2010 at 6:21 pm

  33. Hi Tom, I still have my press, a Dickerson- will handle etchings, mono prints and lithographs. It has a 27×46″ bed and it is motorized with very few hours on it. It also comes with blankets, new rainbow rollers and the table it sits on. I am just outside New York City. I was asking $2,700. My number is 914 316-6156. I can send you some photo’s.

    Noel

    Noel DeGaetano

    April 23, 2010 at 5:24 pm

    • HI Noel: Thanks for your reply. We are looking for manual etching press a bit smaller, with geared crank. Liked at your web site looks like you are doing some interesting things. Best Tom

      Thomas Potts

      April 23, 2010 at 6:48 pm

    • Hi Noel,

      Is this press still available?

      Thanks,
      Gene

      Gene

      August 26, 2010 at 4:53 am

  34. Jann,

    I have no idea how much the steel stand weighs.
    GUESSING maybe 65 lbs. It is 29″W, 26 1/2″ D, 32″ H.
    I have assorted brayers and blankets, again I have no idea how much they weigh, guessing again at 20lbs.
    Hope this helps you. Stacey

    Stacey Dawkins

    April 23, 2010 at 7:56 pm

    • Thanks for this information, Stacey. I would need to have a shipping service crate and ship — so, can the legs be removed from the stand to make the shipping easier? Also, do you have a date in mind for selling — I guess I mean, is it available now?
      Thanks again, Jann

      jann

      April 23, 2010 at 9:13 pm

    • Stacey,
      I’m interested to purchase a hand inking roller. Do you have any for sale?
      John

      Jhon Edwards

      May 21, 2013 at 10:55 pm

  35. Lorraine,

    Noticed that I said “bed” not stand, sorry, Stacey

    Stacey Dawkins

    April 23, 2010 at 7:57 pm

  36. Connie,

    I don’t know how to send the picture on a computer, but if you go to Ettan Etching Press maybe they will show a picture of the MS-3 (mine has a crank handle)
    Stacey

    Stacey Dawkins

    April 23, 2010 at 8:02 pm

    • A little provenance… how old is the press, single owner & condition. Reason for selling. Questimate shipping cost.
      Thanks, Connie

      Connie

      April 23, 2010 at 10:57 pm

      • Stacey,
        Reviewed previous requests made for same info.. no need to repeat. C.

        Connie

        April 23, 2010 at 11:20 pm

    • Yes, there is a picture of this press on the Ettan website.

      Lorraine

      April 24, 2010 at 3:11 am

  37. Jann,

    The stand is welded steel, legs can’t be removed for easier shipping, sorry. It is available currently.

    Stacey

    Stacey Dawkins

    April 24, 2010 at 5:35 pm

    • Thanks Stacey, that’s helpful information. Let me come at this another way: can the press and bed be removed from the table? In an ideal world, I would like to have the table… but shipping it doesn’t make sense given that I can mount the press on a table here. The stated weight of the press at Ettan site is 280 lbs. Your estimate for the press is 170 lbs. Was that a guess, or the press minus the table weight? I just need to give the shippers a weight to get a cost for shipping. Many thanks for your help with this.
      Jann

      jann

      April 24, 2010 at 9:56 pm

  38. Hi Jann,
    My error, 270 lbs is what the brochure says.

    e-mail: arndwk@aol.com if you like.
    Stacey

    Stacey Dawkins

    April 26, 2010 at 7:32 pm

    • Hi Stacey, thanks for your help, though all to naught — the shipping and crating is prohibitive from Oregon to Maine. If I was closer, I would take you up on the purchase. I’m disappointed, and sorry if this is a disappointment to you. Again, thanks– Jann

      jann

      April 27, 2010 at 2:21 am

  39. I am still looking for a small/medium sized manual (gear crank) press in good condition. I’m in the San Diego area. I am willing to travel a reasonable distance to pick it up.

    Thanks!

    Sharon

    Sharon

    April 27, 2010 at 1:34 am

  40. Jann, I was concerned that it might be very expensive to ship that distance. Sorry..
    Stacey

    Stacey Dawkins

    April 27, 2010 at 7:31 pm

  41. Still looking for used press on east coast. Thanks Tom

    Thomas Potts

    May 8, 2010 at 5:04 pm

    • Thomas,

      Are you still looking for a used press on the E. coast?? If so you can call me at 732-263-1121.

      Doug

      September 20, 2010 at 8:05 pm

  42. Hi,

    Have the following available:

    Atlas Drying Racks
    Tray size 52 x 69 inches
    Great condition
    $600.00
    Light Table
    8 x 5 feet ½ inch glass top
    White plexi under the glass
    Handmade Redwood
    $600.00
    Light Fixtures
    13 8 foot 4 bulb units (with bulbs) $50.00 each
    2 8 foot 2 bulb units (with bulbs)
    Douthitt Heavy Duty Direct Method Screen Vacuum Frame
    85 x 144 inches (glass dimensions)
    Like new
    $5,000.00
    NuARC 6,000 Watt Instant-start Metal Halitde Light Source
    Like new
    $1,000.00
    Oil Base Ink
    (many never opened- posters, enamels, all purpose)
    Naz Dar, Colonial, Advance
    $25.00 per Gallon
    Aluminum Screens
    59 x 72 inches
    7 137 mesh
    4 175 mesh
    5 230 mesh
    4 305 mesh
    $50.00 each
    Magnesium Screens
    66 x 90 inches
    1 60 mesh
    1 110 mesh
    2 137 mesh
    5 149 mesh
    4 180 mesh
    4 230 mesh
    $75.00 each
    Magnesium Screens
    74 x 125 inches
    7 140 poly mesh
    3 180 poly mesh
    $100.00 each
    Poplar Screens
    63 x 73 inches
    8 140 mesh
    6 180 mesh
    6 230 mesh
    5 305 mesh
    5 390 mesh
    $25.00 each

    Thank-you,

    Lois

    May 10, 2010 at 9:59 pm

    • I am interested in your 52 x 69 drying racks. Could you please contact me at the email address above or by phone at 770-656-3299

      Alan Howell

      June 2, 2010 at 9:16 pm

    • Hello Lois,
      I know this posting is old, but are you still selling the 52×69 drying rack(s)?

      Rob Swainston

      May 31, 2013 at 11:47 pm

  43. Lois, where are you located?

    Kelli Sincock

    May 17, 2010 at 6:46 pm

    • Hello,

      Port Washington, Long Island, New York.

      Thanks,

      Lois

      May 18, 2010 at 1:56 pm

      • Hi Lois, I know this post is 2 yrs old now but was wondering if you still have any of the supplies you were selling? I’m starting a home studio & need some of the items you had listed. I need a vertical etching tank if anyone reading this has one for sale as well as items one would encounter making the jump from a small etching press to a large etching press. In other words…help! LOL! Jim

        Jim

        January 29, 2012 at 5:53 am

  44. Looking for an etching press. I live in Maine and will travel a reasonable distance.

    Thanks

    Alan Vlach

    May 25, 2010 at 1:13 am

    • My neighbor has a Martech etching press, similar or identical to the one described on this board about a year ago:

      Martech Etching Press update:
      Sorry for the delay, but here are some numbers.
      Large laminating plate is 17″ by 32″ by 3/4″
      The top roller is 16″ by 5 1/2″ diameter
      Bottom roller is approx 4″ diameter
      The crank arm for the gearbox is 7″ ”

      I have inspected the press, which belonged to her late mother who was an excellent printmaker, and it appears to be in good condition. As a printmaker, I offered to help my neighbor find a new home for the press. I have yet to figure out a reasonable price for it. Any suggestions on a price would be most welcome.

      The press is in central NH. Please get in touch with me if you would like more details

      Peggy Merrtt

      Margaret Merritt

      June 3, 2010 at 6:33 pm

      • Hi Peggy,
        I am looking for a press, and am in Maine. I have seen used presses of this size online, asking somewhere around the $1800- $2400 range — depending on condition, with the understanding that buyer is responsible to pick up. Takach sells used presses sometimes — so might be a price guide there. New press prices generally set the market, but then are generally shipped to the buyer. Hope this is helpful. Jann

        jann

        June 4, 2010 at 8:17 pm

  45. Do you have any pictures of the press? Does it include any blankets, etc.? Have you determined a price yet?

    Thanks

    Alan

    Alan Vlach

    June 4, 2010 at 12:26 pm

    • Re: Marteck etching press. My neighbors are away for the weekend. I will take some photographs at the beginning of the week and send them to interested people as well as give more specifics including blankets.

      Let me know by e-mail (peggymerritt@gmail.com) if you would like additional details.

      Margaret Merritt

      June 5, 2010 at 8:57 pm

  46. I have a .25 inch cushion blanket, used 3 times and measuring about 30 x 40 inches. It is very clean and has no dents or squashed areas. I live in Maine.

    Georgina Grenier

    June 4, 2010 at 1:07 pm

  47. I am open to trade a Chandler & Price platen letterpress for an etching press having at least a 16 inch or more in width top roller. The platen size on the C&P I have is approximately 14 3/4 x 9 1/4 inches; I have two chases; the inside width of the chase is 8×10 inches. I am located in the Ohio valley. I am not interesed in selling this press but would trade only for an etching press as specified above.

    Martin Resnick

    June 4, 2010 at 7:58 pm

  48. Hi, I am located in Brooklyn Ny and I am looking for a small table top press, or medium sized press. Plus I am looking for any used equipment for a printmaking studio. If you have any or all of this and are looking to sell it, please contact me. This is for a small liberal arts college in Oakdale NY. Thank you.

    Jason Mones

    Jason Mones

    June 6, 2010 at 8:47 pm

    • i have a martech 32 x 51, the bed is in good shape

      esteban

      August 26, 2010 at 1:13 am

  49. Charles Brand 28 x 50 Very good condition
    Blankets, inks, rollers, paper

    C&H Advantage M48A Matt Cutter (48″) with table

    Flecher Terry 48″ glass cutter

    St. Petersburg Florida

    Offers

    Bob Steward

    August 10, 2010 at 3:39 am

    • Hi,

      How much are you looking to get for the Brand etching press?

      Thanks,
      Gene
      emarinoiii@gmail.com

      Gene

      August 20, 2010 at 10:50 pm

    • Is the Charles Brand press still available?

      Travis Grant

      February 19, 2011 at 5:34 am

      • Yes. It is still available.

        Bob Steward

        February 20, 2011 at 6:07 pm

    • hi Bob: do you still have the press?. let me know.Iam interesting in buy a press.

      helio salcedo

      December 24, 2011 at 3:44 am

    • If the Brand is available please contact me with price

      Francisco

      December 24, 2011 at 3:48 am

    • Bob, have you sold the Brand Press? I’m interested and I live in Florida. ron.garrett@pinecrest.edu

      Ron Garrett

      December 24, 2011 at 5:04 pm

    • BOB:Do you still have your Charles Brand press to sell.I.am very interested.

      helio salcedo

      December 29, 2011 at 3:01 am

  50. Would like to purchase etching press capable of printing a full size sheet of paper. Please send information on name of press, dimensions, age, etc. and asking price. We live on Vancouver Island off the west coast of Canada and would like to know where the press is located. Thanks!

    Lorraine Douglas

    August 12, 2010 at 12:43 am

    • We have new etching presses for sale. Pls kindly browse our page http://www.flickr.com/photos/iggyycn/

      Bed size(mm) Weight (kg)
      40*80*0.8 65
      50*90*0.8 75
      60*110*1.6 350
      70*150*1.6 440
      80*150*1.8 480
      * Delivery time: about 30days
      * Larger size is available at request.

      Best regards,

      Anny / KINGSTAR

      Anny

      August 25, 2010 at 6:36 am

      • I need a medium sized etching press that is suitable for block printing and monotypes as well. It will need to be shipped to Chiang Mai, Thailand. Can you help me and what can you offer. Sizes, prices and transport costs. Thanks for your help.

        Tony

        September 20, 2010 at 11:05 am

  51. Looking for a table-top press (12″ x 24″ print area max) around the West Coast. I will be driving from Southern California to Southern Washington this week and hope to pick it up. Live in N. Cali or Oregon? Give me an email directly at: Rick@BooneArts.com. Thanks!

    Rick Boone

    August 16, 2010 at 9:44 am

  52. We have new etching presses for sale. Pls kindly browse our page http://www.flickr.com/photos/iggyycn/

    100%brand new quality etching press with reasonable price.
    Bed size(mm) Weight (kg)
    40*80*0.8 65
    50*90*0.8 75
    60*110*1.6 350
    70*150*1.6 440
    80*150*1.8 480
    * Delivery time: about 30days
    * Larger size is available at request.

    Best regards,

    Anny / KINGSTAR

    Anny

    August 24, 2010 at 5:01 am

    • Anny:
      How much does each press cost with out shipping?
      How much would the 60*110*1.6 cost to ship to New York City?

      Diana

      September 16, 2010 at 3:20 am

      • Hi, Diana!
        We sold one set of etching press 60*110*1.6cm to New York last month. Now arrived. The unit price(including shipping and insurance) is USD3,400.00/set. The machine is sent to customs warehouse firstly. You could take it to your house after declaration.
        Could you inform me your email? I’ll send you price for each press cost without shipping.
        Thank you!

        Anny

        September 17, 2010 at 2:49 am

      • Diana,
        My email: iggyycn@gmail.com

        Anny

        September 17, 2010 at 3:20 am

    • Hi I live in NYC. I am interested in your press.
      Can you send me a price list?
      Thank you
      fumikotoda@mac.com
      2129207492

      fumi

      November 4, 2010 at 9:08 pm

  53. Seeking a high-quality floor etching/intaglio press (Conrad, American French, Elephant, etc.) in good condition, preferably within driving distance of Boston or Lenox. Bed width 12-30″. Prefer motorized, but crank or wheel considered.

    This will be a production machine; repeatable alignment is critical. Will pay fair market price depending on make, model and condition.

    Al Norman

    August 25, 2010 at 3:40 pm

    • Press located – thanks for help here.

      -Al

      Al Norman

      August 31, 2010 at 2:43 am

      • Hi, Al!
        Press locates in China. Could you inform me your location so that I could inform you the exact shipping and insurance. Thanks!
        By the way, we sold two sets of etching press to US. For your reference.
        Rgds,
        Anny / KINGSTAR

        Anny

        August 31, 2010 at 2:49 am

  54. Anny, Would you please email me your price list for the three smaller presses and cost of shipping to Chiang Mai, Thailand. Thanks, Tony
    gonebeyond@hotmail.com

    Tony

    September 20, 2010 at 2:54 pm

  55. ETCHING PRESS FOR SALE – $950 or BO
    “Charles Brand” Etching Press with 16″ x 30″ steel bed. Sells new for $2,500 +/-. Located in NJ. Many zinc plates also available. Buyer responsible for providing all handling and moving.

    Doug

    September 23, 2010 at 6:24 pm

    • hi doug,
      is your press still available?
      i am in nyc
      thanks,
      Fumi

      fumi

      November 4, 2010 at 9:12 pm

    • Any chance your Charles Brand etching press is still available? Thanks, Sandra

      Sandra

      January 24, 2011 at 4:18 am

  56. LITHO PRESS FOR SALE – “Charles Brand” Litho Press with 24″ x 40″ steel bed. Sells new for $6,500 +/-; Asking $2,500 or BO. Many litho stones also available. Buyer responsible for providing all handling and moving. Located in NJ.

    Doug

    September 23, 2010 at 6:25 pm

  57. Studio closing.
    Used presses for Sale:
    Location: South Central Texas

    Takach Litho 3460 press, bed size 33 1/2 x 72
    7,000

    Grinding sink, with carborendum

    Stones also available, email for list and prices.

    Lainey

    September 25, 2010 at 12:18 pm

  58. Studio closing.
    Used presses for Sale:
    Location: South Central Texas

    Takach Litho 3460 press, bed size 33 1/2 x 72
    7,000

    Grinding sink, with carborundum

    Stones also available, email for list and prices.

    Lainey

    September 25, 2010 at 12:26 pm

    • Do you still have the Takach Litho press?

      Tes Hodock

      February 10, 2011 at 2:05 am

  59. For Sale: Brand New Large Roller 21″ wide, 8 1/2″ diameter,
    28″ roll out length. Never been used – $550. or best offer.
    deborah277@mac.com Connecticut, USA

    deborah weiss

    September 30, 2010 at 3:27 am

    • What is the roller made of? What is the durometer of the roller? Thanks!

      Deb

      October 27, 2010 at 2:30 pm

    • Deb: Have you sold the wonderful press yet? I am in search of a press that has a bed under 24″ wide, but no less than 16″ wide if possible. I have an Ettan 24″W x 48″L in my studio, but am searching for a smaller & more portable size press for road trips & fairs.

      Thanks Tons! Rick

      Ric

      April 14, 2011 at 11:21 pm

  60. I have an Ettan MS-3 Etching Press for sale. Details are on the Ettan site at: http://www.ettanpress.com/page/etching_press.html

    It is 24″ x 48″. I would love to trade for an MS12 plus $1700, or I will sell the press for $3000. Here’s your chance to upsize! I am moving to a smaller studio.

    This press is 280 pounds and is located near Seattle. I prefer that the buyer will pickup.

    mobile@foxfirejewelers.com

    Michael Babinski

    October 2, 2010 at 9:09 pm

  61. My husband is looking for a used Dickerson Combination Printing press located somewhere near Greenville, SC. If anyone has one available, please let us know. Thanks!

    Sue Whittington

    October 6, 2010 at 5:11 pm

  62. We have a Martech press, rollers,tubs and a large double steel sink. I’m not sure if inks, acids and paper are still useable.

    Press Dimentions:
    BED 32″ X 51″
    HT 35″ 51″ TO TOP OF TOWER

    Roller 30″

    ari

    October 10, 2010 at 4:56 pm

  63. I am selling my ten year old Praga etching press: Heavy Duty E-24 with 24×40 inch solid steel bed plate, star wheel and rigid steel support base. Very lightly used and in excellent condition. Located in Northern Virginia (40 miles NW of Washington DC). $3000.

    Specifications:
    Rollers: 6 1/2″ diameter,
    Bed plate (35″ height) 1/4″ x 24″ x 40″
    Stand: 24″ x 25 1/2″
    Weight: 450 LB

    Maggie Siner

    October 18, 2010 at 12:25 am

    • I know this post is old but do you still have the Praga press for sale? I would be very interested in it. Thanks,
      Donna

      Donna

      August 25, 2013 at 1:45 pm

  64. I have an etching printing press manufactured by J. Massey, Rome, NY. Table top. Bed size 12″x 24″. Drum 3 1/2″. Not sure of age but appears to be all there and working. Has not been tried as far as printing so no info on that aspect. Does have some oxidation of drum. Very heavy so will not ship unless arranged for by buyer. Located in Binghamton, NY. I may be able to deliver if your location is between Binghamton and Manorville, NY.

    BoFed

    October 25, 2010 at 6:54 pm

    • Re: tabletop etching press. I have family that might pick it up, though I live in CA. My wife teaches art to children with Autism and this would be a great addition. Please let me know how much. Rick@BooneArts.com. Thank you!

      Rick Boone

      October 26, 2010 at 8:50 am

      • Sorry No Longer available.

        Bo Fed

        November 1, 2010 at 12:59 am

  65. I am looking for affordable used etching/relief and letterpress presses in working condition for a new cooperative printing venture in SE Wisconsin. This hopes to help young printmakers get started and create community outreach. minimum 24×48 bed preferred

    Sam

    October 31, 2010 at 9:09 am

  66. Fine Arts Press to sell American French Tool Etching Press– $18,500 ($27,000 new)

    Large floor model-Bed 48″ x 78″
    Electric motor drive–variable speed control
    3 new felt blankets included
    Newly cleaned and conditioned
    Location: SF, CA

    American French Tool presses have the reputation of being the world’s finest etching presses. This is a real work horse. Utilizing solid steel rolls and heavy steel frame American French Tool presses are the only presses many printmakers will use to print exacting heavy pressure photogravure prints. This press can be used for printing etching, type high wood blocks, collographs, and monotypes. The press bed plate has carefully designed safety devices to prevent the bed from coming off the press. Almost the entire length of the press bed can be used.

    michael

    November 4, 2010 at 8:21 pm

  67. Hi everyone…I’m looking for a 24″ tabletop press…preferably American French Tool or Conrad…please email if you know of a used one for sale…thanks, nick

    Nick tininenko

    November 11, 2010 at 3:49 pm

  68. For Sale: Charles Brand Litho 36×50 inch power bed.
    NuArc flip top vacuum plate maker 40 x 50
    Over two dozen Very BIG stones and storage rack
    Whole shop must go.
    Call Robert Beck if interested 407 733 6097
    Press located in Central Florida

    robert

    November 16, 2010 at 3:10 am

  69. I have a Conrad Combination Press for sale in Western Connecticut. It is hardly used. The specifics are below. Let me know if you need more info. Price is $4000. (Current new price is around $6600.)
    Thanks

    Motor Drive Model C25 Combination Press
    – extra long aluminum bed plate 27 X 54 X 3/4
    – bed stops
    – micrometer gauges
    – all steel stand
    – casters(two locking)

    Kim

    November 28, 2010 at 3:15 am

    • The press has been sold.

      Kim

      December 20, 2010 at 3:39 am

  70. For sale –
    Litho Stone 24 x 30
    It is laminated and is 3 5/8 inches deep with 1 3/16 inches left before getting to the lamination seam. It is laminated to another litho stone. Looks between yellow to light grey. Graphic Chemical has light grey stones of this size listed at $1500 but I’d be happy with $600 if I don’t have to deal with shipping. A great deal! Stone is located in Western Connecticut.

    Kim

    November 28, 2010 at 3:44 am

    • FYI – I’ve decided to offer the stone for $400.

      Kim

      December 5, 2010 at 5:35 pm

      • Could you send me photos of stone? and descriptions about hair lines, iron stain streaks as any of the stone’s problems.
        ricabando@me.com
        Rica

        Rica Bando

        December 5, 2010 at 6:43 pm

      • I would love to buy a stone that size. Can you email me further info?

        Maureen

        December 7, 2010 at 8:31 pm

      • Maureen

        December 7, 2010 at 8:33 pm

      • The litho stone has been sold. Thanks everyone!

        Kim

        December 12, 2010 at 3:48 pm

      • This stone has been sold.

        Kim

        June 1, 2012 at 1:41 pm

  71. I have a motorized Martech etching press for sale. The bed size is 36″ X 57″It was built by Joe Martinf specifically for me.

    Reina

    November 28, 2010 at 7:38 pm

    • The bed size is 37″ X 56″. It is motorized, comes with 3 blankets and a lexan cover It was built by Joe Martin specifically for me. I paid $12,000 new. It is in Nassau County. Any reasonable offer will be considered.

      Reina

      December 13, 2010 at 9:04 am

  72. Is this item posted for sale?

    Reina

    November 29, 2010 at 12:16 am

    • Yes—I want to sell my Martech Etching Press.

      Reina

      December 8, 2010 at 3:31 am

      • How big is it? Where is it? How much for it?

        Deb Napple

        December 8, 2010 at 1:01 pm

      • I too would like to know where the press is located? and how much you are asking?

        Mary

        December 13, 2010 at 4:12 am

      • The press is located in Long Island NY. No reasonable offer refused—Comes with blankets, rollere, etc.

        Reina

        December 20, 2010 at 4:03 am

  73. Graphic Chemical K.U. Roller for sale.
    14 ” long and 4 1/4 ” in diameter. Literally used twice and in new condition. Stored in original box in blocks.

    From their website “50120 Hand Roll-up Roller – Graphic K.U. 14″ – K.U rollers are manufactured with a fibrous cover to carry ink like a leather roller, but clean up with minimal effort like a rubber roller.” Selling new for $271.00 plus shipping. Make a reasonable offer.

    Kim

    December 8, 2010 at 1:12 am

    • The KU roller is still for sale. I also have an older leather roller for sale, roller cuffs, and a large phenolic tympan. Make an offer for all. I have everything listed on Craigslist (with photos)
      for $450 obo.

      Kim

      January 3, 2011 at 2:22 am

    • The Graphic Chemical Roller is still for sale. See posting dated December 8, 2010.

      Kim

      June 1, 2012 at 1:44 pm

  74. As you have probably noticed I am selling off my lithography studio. Besides the items listed prior, I also have:

    1) “Classic” Korn’s litho pencils (from the late 1970’s, really!) I have #5 copal, #4 and #3. I also have a full box of 1/4″ Korn’s litho crayons #2.

    2) Snake slips (full box)
    3) Carborundum
    4) Things I haven’t found yet probably…

    Let me know if you’re interested

    Kim

    December 8, 2010 at 1:23 am

    • These items have been sold. Thanks!

      Kim

      December 22, 2010 at 7:12 pm

  75. i would like to get a copy of the operations pamphlet
    and a parts diagram for the motorized dickerson combination press.

    howard

    December 18, 2010 at 9:31 am

  76. ( e mail correction for dec 18th posting

    howard

    December 18, 2010 at 9:33 am

    • Hi Howard,

      Contact Tom Conrad tom@conradmachine.com at Conrad Machine C0.
      Their combination presses are the “heirs” to the Dickerson Press & a manual is probably either available or applicable from their current models.

      Gene

      Gene

      December 19, 2010 at 1:00 am

  77. Looking for used litho press and larger stone (minimum 20 x 26 in). Also, I have a leather roller that has reversed leather and had been shellaced before I stripped it. Does anybody know of someone who could re-cover the roller or turn the leather right side out?

    Maureen

    December 21, 2010 at 5:52 am

    • Hi Maureen,
      I don’t know the answer to your question but I do have a 14″ leather roller for sale. It is older and was reconditioned by Graphic Chemical years ago. It has been coated and in storage since. I also have a KU roller for sale. (See my other post). It might be easier and cheaper for you… I’m looking to move these last few things. The last item I have is a phenolic linen tympan 24 X 36.
      Kim

      Kim

      December 22, 2010 at 7:11 pm

  78. For Sale: Ettan MS-18 tabletop etching press
    18” x 36” x .50” laminated phenolic resin no memory bed plate. 18″ x 5” diameter top roller; 2.75 diameter Cr/Mo steel bottom roller. 90 lbs.
    Excellent condition with no issues whatsoever; hobbyist use only for three years.
    Asking $2100.00; buyer assumes crating/shipping costs or may pick up. Current new price from Ettan without crating/shipping is $3095.00.
    Located in east central Florida off I95.

    Thom Harrell

    December 21, 2010 at 7:36 pm

  79. Hello,
    I have a Pelican press for sale, 24 inks in 1# cans, rollers, brayers, acid,tool,s felts, asphaltum, oil, and paper.

    Lisa Lutz

    December 23, 2010 at 11:47 pm

    • How old is the press? Where is it located?
      Thanks

      Deb

      December 24, 2010 at 3:22 pm

      • Black Earth, WI, purchased new in 1978, not used. May already be sold to a school, awaiting financing.

        Lisa Lutz

        December 24, 2010 at 4:07 pm

      • Hi Deb, Just saw your comment on printworkshopcentral.com. You were asking about someones Pelican etching press for sale.This was Dec. 24, 2010. Are you still looking for a press? If so I have one. I have a Rembrandt Pelican etching press. press bed is 24×42. It comes with a solid wood table w/shelf & on rollers. I am asking $2800 for it. I live in Georgia.If interested I will email photos to you. Blessings, Debbie

        Debbie Patten

        January 26, 2011 at 5:12 am

    • Hi Lisa,

      Samira and Kat here. We are still can’t wait for things to get worked out and to come get it.
      I’ll be in touch very soon.

      Samira

      Samira

      December 28, 2010 at 9:52 pm

  80. My name is Yoshi Segoshi. I an a Tamarind trained printer and the founder of a workshop called “Edition Works” in Tokyo. Now I live in MA since 1995. I have a Takach made motorized litho press model 2648 with vari-speed and 25.5″ x 48″ backing plate.

    http://www.takachpress.com/lithmotor/index.htm

    I purchased it in 2001 and used it for about 2 years. It is in a perfect working condition with very minor cosmetic flows (minor ink stains and paint chips). I’ll send the photo of the press if you are interested.

    I quit printmaking recently and moving on to painting. I’d like to sell this press for $5000 + shipping. The new one is priced as $18,170. The shipping cost should be less than $1000 within continental US.

    yoshi

    January 9, 2011 at 6:56 pm

  81. Hi,
    I have etching chemicals, (gallon asphaltum, 2 carboundum gritFFF and one other grit size, 2 gallons etching ground, Inks: Graphic Chemical colors all one pound: Raw Sienna, 3 Etching black #514,Raw Umber #1717, Burnt Umber #603c,Yellow, Alizarian Crimson #2138,Dk Brown #545, Thalo Blue #1016, Cadmium Red light #1026, Thalo Green #2099, Unltramarine Blue #1017. Hanco Offset colors 1 1/4 pound: Benezidenne Yellow, Thalo(blue)Green,Thalo(blue)Red, OffsetRhodamineRed, OffsetFireRed, ThaloBlue. 1 qt burnt plate oil, 1 pound easy whipe, paper arches and bfk, a 6″ gelatin roller and a large rubber roller 18 x 6″ diameter, and some tools for sale.

    Lisa Lutz

    February 2, 2011 at 9:48 pm

  82. Due to a serious illness, I am selling a lovingly used Takach 24″x 36″ table top etching press. m located in Southern New Mexico.

    Sam Peters

    February 9, 2011 at 12:26 am

    • I am interested, but am in CA. Give me a call at your earliest convenience. Rick: 714-914-8620

      Rick Boone

      February 9, 2011 at 11:07 am

    • I am interested in talking to you about this. Depending on the situation. I am opening a new collaborative studio soon.

      Samira Gdisis

      February 10, 2011 at 6:27 pm

      • Where are you located? Looking for a colaborative studio in New Mexico.

        Tes Hodock

        February 11, 2011 at 1:40 am

      • We are in Southeastern Wisconsin. If you are interested in talking about it please email 262-994-8780.

        Samira Gdisis

        February 11, 2011 at 4:49 pm

      • This comment is actually in reply to Tes Hodock who mentioned that she is looking for a collaborative studio in New Mexico.

        Hi Tes – where in NM are you located? We’re in Magdalena, NM and hoping to have our collaborative printmaking studio open by April 4, 2011.

        Contact me at ltg@gilanet.com for details if you are interested.

        Laurie Gregg

        March 1, 2011 at 5:24 pm

    • Have you sold the press yet? I’m interested.

      Carrie Kaser

      April 29, 2011 at 6:16 am

      • The press is still available. Where are you located?

        I posted a short message about selling my press in February, but was too ill to reply to any responses, so I will try again. I wish to sell a lovingly used Takach Table Top Etching Press. Bed size is 24″x36″, which easily accommodates a full-sheet (22″x30″) of printmaking paper. E-mail or call me (575-382-3351) for more information. I am selling the press for $3,800 plus shipping and handling. I am located in southern New Mexico.

        Sam Peters

        Sam Peters

        April 29, 2011 at 9:38 pm

      • I’am very interesting in buy your press,do you still have your press to sell?

        helio salcedo

        December 24, 2011 at 3:53 am

  83. Hi, everyone!
    We have brand-new etching press for sale
    (price including packing, shipping and insurance):

    TB-40 (bed: 40*80cm) @$1950
    TB-50 (bed: 50*90cm) @$2150
    TB-60 (bed: 60*110cm) @$3350
    TB-70 (bed: 70*150cm) @$3650
    TB-80 (bed: 80*150cm) @$3800

    For more information and pictures, pls browse my page http://www.flickr.com/photos/iggyycn and email me. Thank you!

    Anny

    Anny

    February 10, 2011 at 8:47 am

  84. I am looking for a medium to large size etching press for a community print shop (at least 24″ wide bed). I live in Georgia but willing to travel. If anyone has anything let me know.
    Thank you

    Travis Grant

    February 19, 2011 at 5:59 am

  85. I just graduated art school, live in Virginia and I am looking for a used tabletop press of good quality in a medium size. Ettan, conrad, Brand, American French preferably. Also if anyone out there has a press they love and suggest I would like to hear what it is and why.

    sharon

    March 4, 2011 at 11:03 pm

  86. I just graduated art school, live in Virginia and I am looking for a good press. Preferably Ettan, Conrad, Brand or American French. If anyone out there has a medium size press they just love I woul like to hear what and why. Thanks!

    sharon

    March 4, 2011 at 11:05 pm

    • Sharon, if you can swing it, the Takach that is for sale by Karen Cunningham is a great press. I have been trying to get a lithography press from them. I don’t think you could buy a better one if it is in good shape.

      Tes Hodock

      March 9, 2011 at 6:54 pm

    • Sharon,
      Our press is not bad choice as good as the mentioned brand. http://www.flickr.com/photos/iggyycn
      If you like, I’d provide reference list to you.
      Thank you!
      Anny

      Anny

      March 10, 2011 at 2:48 am

  87. I have a mint condition takach table top 24×48 press with 7.5 inch drum, 3 blankets,30×60 press bench with one lower shelf and castors for sale total $5,000.00 I am located in NYC.

    Karen Cunningham

    March 5, 2011 at 9:06 pm

  88. Antique etching press for sale in Southern Vermont.

    A. R. King MFG. New York

    http://burlington.craigslist.org/art/2257915924.html

    Josh: 802-867-4486

    Josh Teresco

    March 10, 2011 at 8:26 pm

    • Nice looking old press…has it sold? Thanks, Ric

      Ric

      April 14, 2011 at 11:30 pm

    • Josh:how big is the bed,if you still have the press to sell?.

      helio salcedo

      December 29, 2011 at 2:39 am

  89. Looking for a used roller (mainly for Viscosity), 12″+.

    Aaron C. Bass

    March 11, 2011 at 10:12 pm

  90. I have inks, rollers, asphaltum, grounds, and etchting needles and brayers for sale. I have larger roller too.

    Lisa Lutz

    March 11, 2011 at 11:39 pm

    • Is your large roller still available?

      Deb

      March 12, 2011 at 1:54 pm

    • Hi, Lisa. Have you sold off these supplies? Please let me know if you still have rollers and or brayers for sale. Thanks

      Deb

      April 10, 2011 at 3:15 pm

  91. Roller for sale – never used 35 durometer
    21″ wide 8 1/2″ diameter 28″ roll out length
    450. (or best offer) + shipping

    deborah weiss

    March 11, 2011 at 11:58 pm

    • Hi Deborah– any guestimate on weight? I would like to be able to estimate shipping to Maine. Thanks, Jann

      jann

      March 12, 2011 at 12:37 am

      • about 25 lbs w/ packing approx.
        I have a jpg if you would like
        to see it.

        deborah weiss

        March 12, 2011 at 4:48 pm

      • the roller weighs about 25 lbs w/ packing approx.
        I have a jpg if you would like
        to see it.

        deborah weiss

        March 12, 2011 at 4:49 pm

  92. Yes, a jpg would be great. Any more info, ie manufacturer – is this a rubber roller? do you also have solvent for cleaning the roller that you want to sell?

    jann

    March 12, 2011 at 6:28 pm

  93. send jpg to boze88@aol.com, thanks.

    jann

    March 12, 2011 at 6:30 pm

  94. Hi everyone,
    I’m a postgraduate printmaking student at the University of Aberystwyth School of Art and have been lucky enough to secure a great working space ready for when I leave uni. I’m looking for a lithography press preferably from the UK because of shipping costs. Any information would be very very much appreciated.

    Thank you,
    Sarah Byfield

    Sarah Byfield

    March 17, 2011 at 1:11 pm

    • Hi Sarah,
      As a fellow Lithographer, welcome. Have you thought of contacting Takach here in Albuquerque, NM to see if they are shipping anywhere over in your neck of the woods. Sometimes they have been known to piggyback shipments so it is more affordable. It is probably the most amazing press you will want to use. Good Luck.

      Tes Hodock

      March 17, 2011 at 5:35 pm

  95. I’m looking for a table top etching press. Something smaller than 18″ wide. I’m in l.a.

    thanks,
    Harry

    Harry

    April 10, 2011 at 4:14 am

  96. I posted a short message about selling my press in February, but was too ill to reply to any responses, so I will try again. I wish to sell a lovingly used Takach Table Top Etching Press. Bed size is 24″x36″, which easily accommodates a full-sheet (22″x30″) of printmaking paper. E-mail or call me (575-382-3351) for more information. I am selling the press for $3,800 plus shipping and handling. I am located in southern New Mexico.

    Sam Peters

    April 13, 2011 at 6:47 pm

    • How old is the press? Is it sold? Do you have a stand for it which you would be willing to sell? Thanks, Martha

      Martha Slocum

      May 10, 2011 at 6:49 pm

    • Hi,
      Is your press still for sale. I am located in Massachusetts.
      Thanks, Carolyn

      Carolyn

      November 15, 2011 at 1:27 am

      • Sorry, it is already sold. Thanks for your interest.

        Sam

        Sam Peters

        November 16, 2011 at 1:58 am

  97. I am looking to purchase a medium sized tabletop etching press. I’m in the Philadelphia area, can be reached at deb.Napple@gmail.com

    Deb

    May 10, 2011 at 2:49 am

  98. Dickersen Combination press for sale. Press is 27″x48″. Motorized. There are felts, rollers, and an inking table 24″x36″. It is mounted on a table 3’x6′ (approx.) I purchased the press, used, in 1993. I don’t have a manual for it so I don’t know how old it is. I am in Chicago. email crosssticks@sbcglobal.net.

    Pat O'Neal

    May 20, 2011 at 9:48 pm

  99. I am looking for an etching press, medium size, with or without stand. I live in Miami, FL but I will travel pretty far for a good deal. Thanks, Tim timothybuwalda@gmail.com

    timothy

    May 25, 2011 at 12:11 am

  100. FOR SALE: Charles Brand Model E1630 (Floor Model), 16″ x 30″ bed, with micro dial indicator gauges. Press was purchased new in 1985 from Charles Brand. Press is in very good condition. I am located in Darien, CT.

    I also have 2 Mayline oak flat draw files, 41″ x 27″ for sale.

    Rich

    June 20, 2011 at 3:43 pm

    • HI Rich, Is your Charles Brand still available for sale? Thanks, Scott

      Scott Greene

      December 31, 2011 at 2:48 pm

  101. Rich,
    How much including the flat files?
    Thanks, Tony
    gonrbeyond@hotmail.com

    Tony Milton

    June 25, 2011 at 12:16 pm

    • Tony,

      Etching press $900.00

      Flat files $600 for both.

      Located in Darien, Connecticut.

      Rich

      Rich

      June 25, 2011 at 2:50 pm

      • can you send photos of your etching press? timothybuwalda@gmail.com thanks, tim

        timothy

        July 22, 2011 at 4:34 am

      • I would take it now if I knew how to get it shipped over to Bangkok. Where and how far is the nearest major port to you? If you have pictures please post them. I really need something like this in Northern Thailand. If I can get it to Bangkok I can handle it from there. I’m about 400 miles north. I know this probably sounds crazy to you, but maybe we can work something out. Tony Milton gonebeyond@hotmail.com

        Tony Milton

        July 22, 2011 at 1:58 pm

      • do you still have the press? I would gladly take a road trip an get it. please send some photos to my email. timothybuwalda@gmail.com

        timothy

        July 28, 2011 at 3:48 am

  102. Hi, I am looking for a high-quality floor model etching/intaglio press Conrad, American French, Elephant, or Brand New in good condition. Bed width 28″ x 48″ or larger.

    If anyone knows of such a press for sale, I would greatly appreciate it! Willing to pick-up anywhere in USA. Willing to consider any price based on condition and availability.

    Thank you

    e-mail at khuffman216@gmail.com

    Katie Rose

    July 4, 2011 at 7:02 pm

  103. Looking for a small printing press for intaglio and pronto plates located in San Diego.

    Erica

    July 15, 2011 at 5:26 am

    • We have a 13″ Dick Blick press in great shape with blankets for sale. Can be shipped bu UPS.

      Jim

      James Niss

      November 22, 2011 at 5:44 pm

  104. Hi,
    I am working are downsizing my studio space and wish to sell my Glen Alps hand operated press.
    Height 4’6″ Length 5′ – Steel bed 7/8x30x5’6″ -Bed is 36″ from the floor -Top roller raises 5″ maximum
    Gear ratio is 4 to1. Heavy duty steel construction – top roller diameter 7.5″ bottom roller is 16″.
    The color is the original orange with a brass plate noting Glen Alps press. This press a great press for a studio that teaches – Glen machine is built to last. The press is located outside of the Seattle, WA.
    If interested I will send out detailed images and discuss price.
    email – okeffe@gotsky.com

    Thanks!

    Christie Houston

    July 21, 2011 at 8:47 pm

  105. griffin series 0 etcing press for sale 12″ x 24″ bed $1,200
    east coast (New Jersey) 609-417-0146
    steverorss1@verizon.net

    Steve Ross

    July 27, 2011 at 5:09 pm

    • hi, i am very interested in your press. please send some photos to my e-mail (timothybuwalda@gmail.com). Best, Tim

      timothy

      July 28, 2011 at 3:46 am

    • Hi Steve, Is your Griffin still available for sale? Thanks, Scott

      Scott Greene

      December 31, 2011 at 2:52 pm

  106. Looking for a medium sized etching press. Live in Northern BC. Please contact me by email. tnjlogan@gmail.com
    Thank you!

    Tabitha Logan

    September 23, 2011 at 7:20 pm

  107. I am looking for a medium sized etching/intaglio press. I live in Nova Scotia, Canada. Please contact me by email at the following: brushworks@gmail.com.

    Thank you

    Candice Dunn

    September 26, 2011 at 8:33 pm

  108. Dickerson Combination Press, motorized, for sale, $700. Press bed is 27″x48″. The press is mounted on a table 3’x6′.
    There are felts and large rollers, as well as an inking table 24″x36″. I purchased the press used in 1993. I live in Chicago.
    Please contact me by email at crosssticks@sbcglobal.net

    Patricia O'Neal

    November 15, 2011 at 8:00 pm

  109. Patricia:

    I live in WI and am interested in your press if it is still available.
    I live in Kenosha and am not to far from you.

    Thanks, Ric

    Ric Berns

    November 23, 2011 at 10:27 pm

    • It is available.

      Patricia O'Neal

      November 26, 2011 at 3:04 pm

      • I am interested in your press. Is it still available? I am located outside of Boston. Do you know what shipping might cost?
        Thanks, Carolyn urchinz@comcast.net

        Carolyn

        November 26, 2011 at 4:26 pm

  110. Looking to set up a press for a summer camp near Boston. We would like to buy a press with a larger size bed that is not motorized suitable for mono print.

    Carolyn

    November 29, 2011 at 3:08 pm

    • I have a DICKERSON Combination press, MOTORIZED, 28 X 64″ Benelex bed which does not warp like steel might. ONE Owner. They now go for over $4,000. new.
      i would like to sell this press soon since having a stroke and don”t have use of my left hand at this time.

      The press is located in Mount Ranier, Maryland,outside Washington DC. I am asking $600.00 or best offer.
      PICK UP MUST BE WITH TRUCK TO A LOADING DOCK AND DOLLIES FOR TRANSPORT
      I CAN BE REACHED via e mail: msmallwooo@aol.com

      Michael Smallwood

      December 9, 2011 at 11:37 pm

      • Do you still have your Dikerson press for sell? let me know.please

        helio salcedo

        December 24, 2011 at 4:07 am

  111. Hello,

    I am looking for a small to medium size etching used etching press. Preferably a Brand or a Takach. Anyone aware of one that is on the market? I look forward to hearing from you.

    Thanks.

    Catherine Ruane

    December 24, 2011 at 7:21 am

  112. Interested in your 30×50 Brand Press in St. Petersburg, Florida for sale, if you still have it? I live in Florida so location is good for possible pick-up, etc. Thank you kindly!

    Ron Garrett

    December 24, 2011 at 4:56 pm

  113. For Sale: Ettan MS-18 etching press
    18” x 36” x .50” laminated phenolic resin no-memory bed plate. 18″ x 5” diameter top roller; 2.75 diameter Cr/Mo steel bottom roller. 90 lbs.
    Excellent condition with no issues whatsoever; moderate use only for three years.
    Asking $1600.00; buyer assumes crating/shipping costs or may pick up. Current new price from Ettan without crating/shipping is $3095.00.
    Located in Melbourne FL; off I95.

    Thom Harrell

    December 27, 2011 at 4:54 pm

  114. To Scott Green,

    Please list your price for the Brand Press.

    Thank you, Catherine

    Catherine Ruane

    January 1, 2012 at 10:04 pm

  115. I have a Dickerson combination press for sale in queens ny
    its a DC-2 with a 27″ x 48″ press bed, pictures are on craigslist
    http://newyork.craigslist.org/que/art/2781409249.html

    max dunlop

    January 3, 2012 at 9:38 pm

  116. its $3000

    max dunlop

    January 3, 2012 at 9:44 pm

  117. Looking for a small table top etching press. Bed size between 12-16″ wide. Currently in Upstate NY. Would be willing to travel to pick-up. Don’t have the funds to get a high end model for my studio right now so looking for a used less expensive press. A Blick or Richeson would do fine. Contact me at mskinnr@yahoo.com

    Thank you

    Mark Skinner

    January 13, 2012 at 7:02 pm

  118. Looking to set up a press for a summer camp near Boston. We would like to buy a press with a larger size bed that is not motorized suitable for mono print.

    Carolyn

    January 15, 2012 at 9:41 pm

  119. asking 2500 dickerson dc-2, 27×48, motorized, combo etching litho press.
    http://newyork.craigslist.org/que/art/2803301462.html

    in queens new york. I can crate and ship, but buyers must pay for shipping. I wish I could keep it, but i’m losing my space.

    max dunlop

    January 17, 2012 at 1:06 am

  120. yes it is still for sale

    max dunlop

    February 2, 2012 at 9:08 pm

  121. Looking to buy a press to set up for a summer camp near Boston. We would like to buy a tabletop press with a 20 inch or larger bed that is not motorized, suitable for mono print and etching.

    Thanks send me an email urchinz@comcast.net

    Carolyn

    February 2, 2012 at 9:52 pm

  122. I’m selling a Charles Brand litho press, 24 x 40 inch bed.
    It’s in good working condition, I’m just moving across the country.

    Also selling litho stones, levigators and a graining sink.
    Email me directly if interested

    Maureen

    February 11, 2012 at 11:52 pm

  123. Where are you? i have a press, but may be interested in the lithography stuff.
    thanks

    Georgina Grenier

    February 12, 2012 at 12:15 am

    • Outside of Philadelphia

      Maureen

      February 13, 2012 at 6:02 am

  124. Please let me know the price and the location where you are located.

    Thank you, Catherine Ruane

    Catherine Ruane

    February 12, 2012 at 12:49 am

  125. Please contact me on email if this press is still available, location, cost, etc.
    Sam@blackeyedpress.com.

    Thanks!
    Samira

    Samira Gdisis

    February 12, 2012 at 12:13 pm

  126. I am a lithographer in Albuquerque and am interested in the press and all other items. Please let me know cost and your location. You can email me at contact@allartcounts.com.

    Thank you,
    Tes

    Tes Hodock

    February 13, 2012 at 12:34 am

    • Tes, I have two beautiful litho Stones, 1 new never used 14″ leatherr roller, 1 never used 24″ rubber medium durometer roller and a 10″ levigator for sale at my studio in Michigan. If interested please note my post dated 3-4. I can send photos via email or if you have questions please call (231) 591-2744.
      Thank you,
      Robert Barnum

      ROBERT L. BARNUM

      March 4, 2012 at 12:52 pm

  127. I have two beautiful stones I purchased new, a new unused 14″ leather roller still in the original box, a new 81/2″ x 24″ aluminum core medium durometer ink roller still in the original shipping crate and a 2″x10″ levigator I would like to sell. The litho stones have been used only a few times and are a light yellow color. One stone is 22″x28″x3 3/4″ thick. The other stone is 16″x20″x 3 3/8″ thick.
    I am an art professor at a University in Michigan and I simply need to clear some space in my studio. I would crate and organize shipping but shipping costs would need to be covered by the buyer.
    Asking price.
    1) 22″x28″ litho stone. Retail price: $1431 plus shipping…My price: $900 plus shipping.
    2) 16″x20″ litho stone: Retail price: $795 plus shipping…My price,,$450 plus shipping
    3) 14″ leather roller. Retail price: $380 plus shipping. My price: $180 plus shipping
    4) 24″ rubber ink roller. Ratail price: $856 plus shipping. My price: $425 plus shipping
    5) 10″ levigator. Retail price: $274 plus shipping. My price $160 plus shipping.
    I also have a beautiful old book press in excellent condition I would like to sell for $200. The leather roller will need to be conditioned before using.

    ROBERT L. BARNUM

    March 4, 2012 at 12:31 pm

  128. Very interested in your rubber ink roller – please let me know the brand/manufacturer.
    Thank you

    deborah

    March 4, 2012 at 2:20 pm

  129. sold it. If you are interested in ink based etching inks, let me know, also etching paper.

    Lisa Lutz

    March 4, 2012 at 6:51 pm

  130. I purchased the roller from Rembrandt Graphic about ten years ago. I never used the roller and it has been safely stored in the original wood shipping crate. Very nice roller. I had a smaller version I used often.
    The aluminum core and handles are nicely engineered.
    I can send photos via email if you would forward an email address.
    Thanks,
    Robert

    Robert L. Barnum

    March 4, 2012 at 11:01 pm

  131. I’m looking for a table model hand crank intaglio printing press around 12 x 24 or there about. I’m a teacher and I need a press I can tote around for classes. I am in Florida but will pick it up in any of the southern states. Email me if you have one for sale. Thanks.

    Ann

    March 10, 2012 at 4:51 pm

  132. I’m looking for a table model hand crank intaglio printing press around 12 x 24 or there about. I’m a teacher and I need a press I can tote around for classes. I am in Florida but will pick it up in any of the southern states. Email me at diversifiedart101@gmail.com if you have one for sale. Thanks.

    Ann

    March 14, 2012 at 3:09 am

  133. Looking to buy a press to set up for a summer camp near Boston. We would like to buy a tabletop press with a 20 inch or larger bed that is not motorized, suitable for mono print and etching.

    Thanks send me an email urchinz@comcast.net

    Carolyn

    April 19, 2012 at 12:51 pm

  134. Still looking to buy a press to set up for a summer camp near Boston. We would like to buy a press with a 20 inch or larger bed that is not motorized, suitable for mono print and etching.

    Thanks, Carolyn

    send me an email urchinz@comcast.net

    Carolyn

    May 1, 2012 at 1:03 am

  135. I have a Wright motorized combo etching-litho press for sale. The bed is 36″ x 84″. I purchased it new in 1988. I am asking $2,800.00.

    The press is located in my basement studio in Ellicott City, MD and transportation would be the responsibility of the purchaser.

    The press is in perfect working order, and has moderate usage. I would be happy to send photos or answer any questions.

    Please email me if interested at acrumbley@hotmail.com

    anncrumbley

    May 27, 2012 at 9:54 pm

  136. I would like to purchase a litho shop to set up in Iowa City. I would like to have a press that will print a full sheet of paper 30″X44″. I would also like to pick up a few stones and comp rollers. I am willing to drive to pick them up if the price is reasonable. I am currently in Albuquerque, NM and will be moving to Iowa in July. July or August would be the best time for me to pick things up.
    I am aslo interested in finding a vandercook letter press.

    Asa

    May 31, 2012 at 4:11 pm

    • Asa, I plan to sell a restored Poco Proof Press No. 2, if you are interested. It is a manually operated cylinder letterpress similar to Vandercook, with an 18″ x 25″ bed size.Lots of info available on these beautiful presses online. It is located in western CT. LMK if you are interested.

      Gene Marino

      May 31, 2012 at 6:23 pm

    • The press has been sold – hope you find a suitable one when you move to Iowa….AC

      anncrumbley

      June 25, 2012 at 12:05 am

  137. ASA, if you note comments or listings for stones and a roller that I have for sale as listed on March 4th. The stones and the roller are still for sale as is my levigator.

    ROBERT L. BARNUM

    May 31, 2012 at 11:03 pm

  138. I have two very nice stones for sale that are as close to new as you can get. I also have a large 24″ roller that is still in the original shipping crate and has never been used for sale. I will be in Cedar Rapids, Iowa in the next month or so to install a mural which was part of an international competition so could possibly meet there to deliver.

    ROBERT L. BARNUM

    June 25, 2012 at 1:17 pm

    • Please tell me about the roller. Diameter? Material? Manufacturer? Price?

      Deb Napple

      June 25, 2012 at 1:22 pm

      • Deb, the roller is a 81/2″ x 24″ medium durometer roller with an aluminum core.It is a beautiful roller. If I remember correctly the roller is a around a 35 durometer. I had purchased the roller new from REMBRANDT some years back and had never used it. I had a number of large rollers from REMBRANDT and GRAPHIC CHEMICAL and so it was simply safely stored away in the original wood shipping crate..Current retail on a similar roller is $856 plus shipping. I am asking $425 plus shipping. For shipping distance reference I am in Michigan.

        ROBERT L. BARNUM

        June 26, 2012 at 1:48 pm

  139. I have two presses for sale in Las Vegas, Nevada (89156).

    One is a Laguna Etching Press (26 x 48), the other is a Griffin Lithography Press Series II.

    Both have been stored for a while, at times outdoors, and will need a thorough “going over”.

    For sale $1997 each, Sold AS IS (Buyer pays freight).

    Pics available upon request (couldn’t post here).

    They are both listed on Ebay this week (Jan ’13)

    Email: VegasArt@live.com

    Jay

    January 6, 2013 at 7:41 pm

  140. Charles Brand Motorized Etching Press for Sale:

    MUST SELL – NO SPACE FOR IT….ACCEPTING ALL REASONABLE OFFERS

    I have a motorized Charles Brand industrial printing press that is 36 x 60.Press weights 2500pds.

    The motor states: Model 6A-76107MJ
    and the plaque says: Patent No: 3.336.865

    Everything is in perfect condition. The motor and bed are perfect. Absolutely excellent condition. Only the 2nd owner.

    The press is arriving in Los Angeles on Monday, Feb. 11th
    Willing to negotiate….This is your chance to own a truly a beautiful fabulous press.

    Selling for $6999.00 = REDUCED TO $6500.00

    Also have a huge/heavy production table – Perfect for print making: 98 long x 47.5 deep x 33 high with glass: $350.00
    = REDUCED TO $250.00

    CAN/WILL SEND PICTURES VIA EMAIL

    CAROLYN EMOLE

    February 8, 2013 at 10:13 pm

    • Yes the press is still available. If you send me your email address I can send pictures if you’d like. My email address is cemole1755@aol.com

      CAROLYN EMOLE

      February 10, 2013 at 10:11 am

  141. My email is clruane@yahoo.com Thanks, Catherine!

    Catherine Ruane

    February 10, 2013 at 8:01 pm

  142. Etching Equipment and su
    My wife passed away and I need to sell.
    ETTAN ETCHING PRESS FOR SALE. MS-3 (with standard drivewheel)
    BED SIZE: 24.25 X 48 X .75″ WEIGHT: 280 lbs $ 3500.00 plus crating and shipping
    Also have a
    ETTAN HOT PLATE 1800 watt 110v 27.5 x 36 x 5 $ 800.00 plus crating and shipping
    or
    Will sell both for $ 4000.00 plus crating and shipping
    Misscellaneous tools and supplies also available

    George Plourde

    February 21, 2013 at 1:11 am

    • What are your miscellaneous tools and supplies?
      I am particularly interested in finding a large roller. Do you have one of those?

      Deb Strong Napple

      February 21, 2013 at 11:40 pm

    • Hi!
      Do you still have the press for sale?

      zhenya

      September 26, 2013 at 3:24 am

  143. I have a large roller, 8 3/4″ x24″ for sale. It is still in the wooden box and has never been used. I purchased it from Rembrandt Print supply some 12 years ago or so and never used it. Beautiful roller and I believe is a 35 durometer. I can send photos.

    Robert L Barnum

    February 22, 2013 at 7:22 pm

  144. The roller is in perfect condition. It has never been used. It has never been taken out of the wooden shipping/storage box. This roller lists new for $875 plus shipping. I will sell it for $425 plus shipping.
    Phone number at FSU..231-591-2744

    Robert L Barnum

    February 25, 2013 at 4:57 pm

    • Hi Robert. Is this roller still available ? Do you have any other rollers for sale ?

      Mark

      Mark Bartholome

      March 28, 2013 at 9:17 pm

  145. Oops my email is
    Marklouisco@gmail.com.

    Mark Blech

    March 21, 2013 at 12:47 pm

  146. I’m looking to buy an intaglio/ woodcut press, hoping to find one at least 28 inches wide or greater but will consider all sizes. I live in the NY / New England area, I’d prefer one in that area so I can come get it myself , shipping is so expensive. My email is marklouisco@gmail.com

    Mark Blech

    March 22, 2013 at 7:48 pm

  147. Mark, I do still have the roller for sale. I can send photos if you would like..

    Robert

    March 29, 2013 at 12:08 pm

  148. Only one owner in as-new condition

    ETTAN MS-3 ETCHING PRESS FOR SALE. with Captain’s ShipWheel style drive
    BED SIZE: 24.25″ x 48.75″ WEIGHT: 280 lbs
    Will include Custom made Paper Drawer Cabinet. 48″ x 26″ Made for the Press to sit on. Has (8) 36″ x 20″ x 2 1/2″ drawers for storing etching paper, plates and finished prints. Sits on 4 heavey duty casters making it easy to move about your studio. The enitire exterior and top is finished in Matt White Formica. The inside of the paper drawers are bare unfished wood, void of harmfull chemicals.
    Was $ 3500.00 NOW $ 2995.00 INCLUDING THE CABINET plus crating and shipping

    Also available

    ETTAN HOT PLATE 1800 watt 110v 27.5″ x 36″ x 5″
    Will include Custom made rolling work table. 72″ x 28″ The Hot Plate is inset on one side making the top flush with the finished top on the other side which also has a inlaid marble slab. The bottom section of the table is completly inclosed and the entire exterior and top is finished in Matt White Formica.The leftside has one storage drawer and a large two door storage area below. The right side also has a large two door storage area.

    Was $ 800.00 NOW $ 695.00 INCLUDING THE CABINET plus crating and shipping

    This is one of a kind setup. The combination of these four pieces make up the perfect working arrangement for the serious Printmaker. Don’t miss out on this golden opportunity.
    Photos available on request

    George Plourde

    April 3, 2013 at 9:03 pm

    • Hi George, Could you send me an image of your press set up? Thanks, Christie

      Christie Houston

      April 3, 2013 at 10:58 pm

      • CHRISTIE, I WOULD BE HAPPY TO. MY EMAIL ADDRESS IS gildedframes@earthlink.net
        I AM JUST HEADED HOME SO IF YOU EMAIL ME I WILL SEND YOU PHOTOS OF THE EQUIPMENT TONIGHT. ANY QUESTIONS YOU COULD ALSO CALL ME AT 239-398-3396
        GEORGE

        George Plourde

        April 4, 2013 at 1:03 am

    • George,
      Do you still have the press? Where are you located?

      Donna

      August 3, 2013 at 3:18 pm

      • Yes Donna I still have the press. It is in Naples, Florida

        George Plourde

        August 6, 2013 at 12:01 am

      • George,
        Could you send me pictures of the equipment you have for sale. I am in Boston but could have it freight shipped. The whole system/setup sounds amazing. My email is: dsavastio@verizon.net.
        Thanks in advance,
        Donna

        Donna

        August 25, 2013 at 1:55 pm

  149. Ettan Etching Press MS-3 for sale including table that it sits on. Specifics : 24” x 48.75” x .75” about 280 lbs. This press is located in Ellicott City, Maryland.

    Kimberly

    April 15, 2013 at 9:20 pm

    • $2500 is the price….thanks!

      Kimberly

      April 15, 2013 at 9:21 pm

      • Hi Kimberly,

        Do you have an email address so that I can request a photo of your press? Thanks!

        kathleen

        May 29, 2013 at 6:32 am

      • Any chance that you still have this press?
        Thanks,
        Donna

        Donna

        August 26, 2013 at 4:18 pm

    • Hi Kimberly,
      Is your Ettan press still available? If so, I would be interested.
      Thanks,
      Donna

      Donna

      August 25, 2013 at 3:15 pm

  150. Motor driven Etching Press for Sale.
    The press is uniquely designed with a central screw to yield high even pressure with a high degree of accuracy. The rollers are solid steel- 8″ in daiameter and 36″ in length. The bed (steel and copper) is 3’x6′. It is currently disassembled for easy transportation and can be viewed at my home in Vancouver BC.
    I shall be available to assist in setting it up. Will Email Photo on request
    Asking $800 OBO.
    Also for sale large paper drawers ( wood 8 drawers 46″x32″).
    My Email: tkotowitz@gmail.com

    Tomi Kotowitz

    April 24, 2013 at 8:11 pm

  151. River Arts in Damariscotta, Maine, is selling 3 presses, and 30 lithography stones. 207-563-1507

    1) Heavy duty, professional grade etching press of unknown manufacture, possibly American. (Gears, handwheel and reduction are similar to c.1917 Sturges Co. (Lee Sturges) etching presses. This press is more modern though. Bedplate 26″ x 45.5″ – overall 26.5″ x 48.5″ Double-reduction gearing drives the bottom roller. (9:1 gear ratio). Weight — 680 lbs. includes stand. Comes with felts. Good condition. $6,000 or BO

    2) Lithography press: Robert Mayer/Parks/Fuchs & Lang type, late 19th-/early 20th-century cast iron. approx. 27.5 x 32 ” bed. Condition unknown. $3,000 or BO.

    3) Charles Brand etching press, c. 1965 model. Hand driven. Bed size 18″ x 28″ (extended length 36″). $3,000

    4) 30 lithography stones, ranging in size from 8″ x 10″ — 21″ x 28″, various colors, to yellow to gray. $6,000 the lot; or BO does not include shipping.

    Alison C

    May 22, 2013 at 4:09 am

    • Update: Charles Brand has been sold. But we do have also a Dickerson Combination Press, c. 1984, one owner, barely used. It is a hand-driven Model 84, 48″ x 27″ bedplate. 550 lbs.

      AlisonC

      June 22, 2013 at 10:33 pm

      • Is this combo press still available? If so, what’s the price? thanks!

        Melissa

        May 23, 2014 at 6:06 am

  152. I am looking for a second hand etching press and other supplies. I am located in the Bay Area of California. Please send a note if you have something available thanks!

    kathleen

    June 13, 2013 at 1:26 am

    • Hello Kathleen,

      I have a Charles Brand Industrial motorized press.. It’s 36 x 60 and is a beautiful press and in perfect condition. I’m located in Los Angeles. Please let me know if you like more details/pictures. My personal email is:cemole1755@aol.com

      CAROLYN EMOLE

      June 13, 2013 at 7:23 pm

    • I have just placed my Laguna etching press model # 2648 for sale. It is located near Lake Tahoe close to the California Nevada border. For more information email or call Russel @ 530-694-2467
      Price: $2,200 including felts but excluding shipping.

      Russel Ketenjian

      December 23, 2013 at 8:50 pm

    • Good morning Kathleen,

      Have you found the etching press of your dreams?

      Russ

      Russel Ketenjian

      December 24, 2013 at 9:42 pm

  153. I have a motorized Charles Brand industrial printing press that is 36 x 60. Heavy.
    The motor states: Model 6A-76107MJ and the plaque says: Patent No: 3.336.865

    Everything is in perfect condition. The motor and bed are perfect. Absolutely excellent condition.

    Ask any questions.

    Selling: was $6999.00 ……NOW: $6200.00

    Contact me for photos and other information.

    Also have a huge/heavy production table – Perfect for print making:

    98 long x 47.5 deep x 33 high with glass: $350.00 REDUCED: $250.00

    CAROLYN EMOLE

    June 22, 2013 at 9:24 pm

    • Do you still have the press for sale?

      Larry Thomas

      April 26, 2014 at 1:50 pm

      • Hi Larry,

        I have a potential buyer, however, nothing has been signed or paid for at this point. Please let me know if you have any questions.

        Thanks,
        Carolyn

        Carolyn Emole

        April 26, 2014 at 10:29 pm

  154. I am looking for an Ettan MS-12 that can be shipped to Canada or an etching press of a similar weight and price range. Any suggestions?

    Caroline Clarke

    July 31, 2013 at 2:50 am

    • I have an Ettan MS3 press for sale with a custom built stand. Bed size; 24.25x36x8. Barely used. Selling: $3950.00. Now $3250.00. 280 LBS. Sarasota, Florida.

      Gail Emmott

      August 31, 2013 at 4:06 am

      • Hi Gail,
        I would be very interested in learning more about your press. Can you send me photos? Love the bed size. I am in Boston but could have it freight shipped to me. Is there anything wrong with it? Why are you selling it?
        Thanks in advance. My email is donnasavastio@me.com
        All best,
        Donna

        Donna

        August 31, 2013 at 6:27 am

      • Gail,
        Is your press and stand still for sale?

        Julie Schuck

        September 13, 2013 at 9:28 pm

  155. I’m looking for a print drying rack. I live in upstate NY and would like to find one locally and inexpensive

    Mark

    September 12, 2013 at 4:47 pm

  156. I am looking for a used etching press, Conrad, Takach or Ettan. 18″ or 24″.
    I am in Lexington, KY. Will take care of shipping.

    Nanadadzie

    September 24, 2013 at 1:33 am

    • Nanadadzie, have you found your press yet? I have an 18″ x 36″ Ettan press that I am considering selling. I am moving to a very small apartment in NYC. If anyone is interested, please email… share_on_james@yahoo.com. Location: San Diego. If you know about Ettan presses, you will know that if you remove the bed on this one, it can be moved by two relatively strong people (my partner and I!)

      Sharon James

      November 5, 2013 at 10:25 pm

  157. Hi! I am looking for a small tabletop etching press. I am located in Brooklyn NY.
    Please let me know if anyone is selling.
    e-mail: info@zshuk.com
    Sincerely,
    Zhenya

    zhenya

    September 26, 2013 at 3:19 am

  158. Is that Ettan press powered by hand or electric?

    Catherine Ruane

    November 6, 2013 at 10:09 am

  159. Hi Catherine, here is a link to more info on the Ettan press. My press is the MS-18.

    http://www.ettanpress.com/page/etching_press.shtml

    If you read the backstory, you will see that the press has been designed using materials that shed the weight, making it actually moveable, while not compromising on quality. No motor, so nothing to go wrong. In beautiful condition.

    Sharon James

    November 6, 2013 at 4:47 pm

  160. Hi, I have a Dickerson D

    Bill Augustus

    November 17, 2013 at 2:49 am

    • Hi! I am looking for a small tabletop etching press. I am located in Brooklyn NY.
      Please let me know if anyone is selling and the details.
      e-mail: info@zshuk.com
      Sincerely,
      Zhenya

      zhenya

      November 18, 2013 at 5:13 pm

    • Hi, I’m selling a Dickerson DC2 combination press. hand crank/ hand drive. Good condition, some average grime and ware, but nothing serious. Works great! All the rollers move well and the crank is smooth. I’m more a painter than printmaker, so please ask questions. I’m located in the Red Hook area of Brooklyn, NY. My building has a freight elevator and loading dock for easy pickup. I need to clear some space in my studio so please make me an offer. Email for pics.
      williamaugustus96@hotmail.com

      Thanks,
      Bill

      Hilary

      December 2, 2013 at 6:38 am

  161. Hi, I’m selling a Dickerson DC2 combination press. hand crank/ hand drive. Good condition, some average grime and ware, but nothing serious. Works great! All the rollers move well and the crank is smooth. I’m more a painter than printmaker, so please ask questions. I’m located in the Red Hook area of Brooklyn, NY. My building has a freight elevator and loading dock for easy pickup. I need to clear some space in my studio so please make me an offer. Email for pics.
    williamaugustus96@hotmail.com

    Thanks,
    Bill

    Bill Augustus

    November 17, 2013 at 3:05 am

  162. Thank you for your interest, but the ETTAN MS-18 is no longer available.

    Sharon James

    November 18, 2013 at 9:30 pm

  163. Hi, I’m selling a Dickerson DC2 combination press. hand crank/ hand drive. Good condition, some average grime and ware, but nothing serious. Works great! All the rollers move well and the crank is smooth. I’m more a painter than printmaker, so please ask questions. I’m located in the Red Hook area of Brooklyn, NY. My building has a freight elevator and loading dock for easy pickup. I need to clear some space in my studio so please make me an offer. Email for pics.
    williamaugustus96@hotmail.com

    Thanks,
    Bill

    Hilary

    December 2, 2013 at 6:37 am

  164. Hello,

    I am selling my Laguna Etching Press model # 2648 including felts but excluding shipping. The press is located near Lake Tahoe near the California Nevada border.
    Price: $2,200.00
    Contact Russel for more information at Ketenjian6@gmail.com

    Russel Ketenjian

    December 23, 2013 at 7:38 am

  165. FOR SALE -Whelan Express Pro Etching Press – Excellent Condtion Print Size 30 x 44
    Fully assembled the Xpress Pro will roll through a 43” doorway.
    For narrow openings or transport the press can be separated from its stand and slide sideways.
    Roller moves across the bed allowing for smaller studio footprint.
    Press is located in CT asking 6200. contact deborah277@mac.com

    deborah

    January 3, 2014 at 4:50 pm

  166. Dickerson Combination Press For Sale in Milwaukee, WI.
    Motorized, Model 62, Selling as is (some repairs needed).
    Pictures and measurements available upon request.
    Will take best offer. Buyer responsible for pick-up.
    Contact jessica.wegner@alverno.edu

    Jessica

    January 20, 2014 at 11:34 pm

  167. Correction. Dickerson Combination Press for sale in Milwaukee, WI is a model 61

    Jessica

    January 20, 2014 at 11:45 pm

  168. I have a Fuchs Lang Litho Press for sale. Older model but a great work horse. Turn of the century circa 1900. I rebuilt this and restored it from ground up including new bed. I been using this press for stone and plate litho as well as wood cut and lino (yes relief prints too). Located in Nashville TN area and selling it to make room for newer larger model. This unit is easy to disassemble and ship approx weight is <1000#.
    Looking for $950 , you pick up here and move.

    Mike M

    January 30, 2014 at 10:57 pm

  169. What does the Wright Press sell for that dies etching and lithography with a main frame that’s 65″ x31″x 36″?

    Susan

    February 6, 2014 at 8:09 pm

  170. I have a pair of combination presses for sale in NW CT.

    • Wright Combination Printmaking Press
    Excellent for intaglio, relief or litho printmaking
    27″ x 48″
    Motorized; missing bed (can be sourced from http://www.onepointesolutions.com); very good condition.
    Pick up only in New Milford, CT 06776
    $800

    • Dickerson Combination Printmaking Press
    Excellent for intaglio, relief or litho printmaking.
    27″ x 48″
    Motorized; excellent condition. Includes heavy duty steel table.
    Pick up only in New Milford, CT 06776
    $1800

    emarthree

    February 6, 2014 at 11:31 pm

  171. An Ettan MS-3 etching, intaglio, engraving press in mint condition. It comes with a large 28″ by 36″ hot plate, a 32″ by 46″ paper drying rack with 48 racks, a set of felt blankets, a wet sink for paper, and a rolling base table for the press. Numerous other implements can be included if needed- brayers, rollers, etching tools, mezzotint rocker, a variety of inks, etc. a few zinc and small copper plates.

    The MS-3 bed, 24″ x 48.75″ x .75″ (62 cm x 124 cm x 1.9 cm), is protected with a non-corroding metal sheet, which can also be used to facilitate plate registration. The upper roller has a 6″ (15.2 cm) diameter. The lower roller, made of Cr/Mo steel, is 4″ (11.5 cm) in diameter. A 12:1 gear reduction provides high torque. Each roller is supported by four bearings, each of which can withstand 55,000 lbs (24,970 kg). More pics to come.

    Easy to move – will help deliver in the Tallahassee area.

    For its size, this press is truly lightweight – approximately 280 lbs (126 kg). The MS-3 has a standard drivewheel.

    cgmacm

    February 10, 2014 at 10:59 pm

  172. Dickerson Combination Press for Sale in Milwaukee,WI. Motorized, Model 61, Selling as is (some repairs needed). Pictures and measurements available. Will take best offer; buyer responsible for pick up. Contact jessica.wegner@alverno.edu. Must sell quickly!

    Jessica Wegner

    February 13, 2014 at 9:49 pm

  173. For sale is a large hydraulic printing press. Toronto, Canada
    Make: Belledonne XL 66-24 universal
    Pristine condition. As new.

    This is professional equipment for printmaking:
    – creating prints from etchings, wood cuts or lithography.

    This press has sat virtually unused, for years. It has only been used 3 times!!!
    It has been stored indoors.
    mcrawford7877@gmail.com
    http://toronto.en.craigslist.ca/tor/for/4381280261.html

    Martin

    March 21, 2014 at 5:43 am

  174. Conrad Etching Press model number E24. Bed size is 53×24. Need to sell the press because I am moving. Bought the Press at 2800$ I am selling it for 2000$

    Good condition, no problems been using it for the past year.

    Also available for free a table witch the press sits on that has paper storage racks built in.
    Etching supplies available as well.

    http://vancouver.en.craigslist.ca/van/art/4403354544.html

    carsoncartier@gmail.com

    Carson Cartier

    April 2, 2014 at 8:52 am

  175. Ettan etching press for fine arts printing – $4500 (Tallahassee, FL)
    An Ettan MS-3 etching, intaglio, engraving press in mint condition. It comes with a large Ettan 28″ by 36″ hot plate, an industrial 32″ by 46″ paper drying rack with 48 racks, a set of felt blankets, a wet sink for paper, and rolling base tables for the press and hot plate.

    Pics available of the actual equipment if you would like to see.

    Carol MacMillan
    850-322-7071 cell and 850-745-8290 on the weekends.
    carolgmacmillan@hotmail.com

    cgmacm

    April 2, 2014 at 6:48 pm

  176. Carol, what size is the Ettan press bed and is it electric?

    Catherine Ruane

    April 3, 2014 at 4:03 am

    • MS-3 Etching Press
      It has the large drivewheel, not electric. 24″ by 48″. Here is Ettan’s description:

      The MS-3 bed, 24” x 48.75” x .75” (62 cm x 124 cm x 1.9 cm), is protected with a non-corroding metal sheet, which can also be used to facilitate plate registration. The upper roller has a 6” (15.2 cm) diameter. The lower roller, made of Cr/Mo steel, is 4” (11.5 cm) in diameter. A 12:1 gear reduction provides high torque. Each roller is supported by four bearings, each of which can withstand 55,000 lbs (24,970 kg).

      For their size, these presses are truly lightweight – approximately 280 lbs (126 kg). The MS-3’s are offered standard with a drivewheel.

      cgmacm

      April 3, 2014 at 5:12 am

      • Hello, Do you still have the etching press? I am very interested and I live in Tampa. I might make a trip in March to Tallahassee.

        Amy Lee

        January 19, 2015 at 7:25 am

  177. Thank you!

    Catherine Ruane

    April 3, 2014 at 5:36 am

  178. 18 inch leather roller for sale, classic, most likely a Schmautz. Just reconditioned. Asking $350 including shipping. Please email stonefoxeditions@gmail.com or call 781-354-7616 for more information and pics

    Alexander Kirillov

    April 16, 2014 at 7:24 pm

  179. Stonefox Editions offers press repair, restoration, and moving services on the East Coast. We have experience with hand and motorized presses of the etching and lithography varieties. Past projects include Carrier Pigeon, The Baldwin School, AtelierAE and others.

    stonefoxeditions.com
    https://www.facebook.com/stonefoxeditions
    stonefoxeditions@gmail.com

    Alexander Kirillov

    April 16, 2014 at 7:28 pm

  180. For Sale preferably as a package- for $10,000 obo. I am located in the North Bay Area of California, delivery can be arranged.

    1. Griffin Series II #00100 Electric Combination Lithography/Intaglio Press- 31 1/2″x60″ press bed.
    This is $24,500.00 new on griffin’s website.
    2. Lithography Stone- 30″x24″x4″ About $1500.00 new
    3. Levigator- 10″ $315.00 new
    4. Ink Roller- 18″ Synthetic Leather Roller (Grabit, Hickie Type Roller)
    For use with all inks $600.00 new
    5. Graining Sink- Custom, same height as press
    6. Stone Cart and ink roll up station- Custom, on castors, same height as press and graining sink
    plus a tympan, grease, gum arabic, lithotine, inks, carborundum grits, nitric acid etc etc.
    Pretty much everything you need to get printing

    I may end up selling these items separately but prefer not to.

    Contact shallowalchemy@gmail.com for more info and pics

    Eli Samuel

    April 22, 2014 at 9:01 pm

  181. Hi John,

    I have a potential buyer for the press. However, nothing has been signed or paid for at this point. Where are you located?

    Please let me know if you have any other questions.

    Thanks,
    Carolyn

    Carolyn Emole

    April 26, 2014 at 10:27 pm

  182. Hi Larry,

    Sorry – I wrote down the wrong name.

    Carolyn

    Carolyn Emole

    April 26, 2014 at 10:28 pm

  183. For Sale: Fuchs & Lang Litho press. I recently rebuilt this including new bed. I currently run litho stones but also use it for woodcuts and lino cuts. This is a direct drive style hand crank circa 1900. It works great for lithography as well as relief printing. Located in Nashville TN selling it for $950. email for detail and pictures.

    Mike M

    April 28, 2014 at 6:34 pm

    • Hello,
      I live in Albuquerque and would like some pictures and size info. Please email me. Thank you.

      Teresa

      April 29, 2014 at 10:32 pm

      • You can contact me at mike@bl;uefigeditions.com to request pictures to be emailed,
        You can also get a quick glimpse of it at my website BlueFigEditions.com under “facility” tab
        The litho press is the one with the wooden butcher block style bed. (bed is 24″ x 42″)

        Mike M

        April 30, 2014 at 11:22 pm

  184. For Sale : ETTAN MS-3 press with felts. In immaculate condition. $2500 includes stand. Located in Maryland.

    https://lh4.googleusercontent.com/BhBThefSXxc6Zrgkj1jlntBaDsmoJvpdjxrRP3Xd0Os=w1103-h827-no

    albert

    April 30, 2014 at 9:23 pm

  185. Sold.

    albert

    May 2, 2014 at 8:16 pm

  186. Looking for an etching press, drying rack, and various printmaking equipment and materials. Florida, Virginia, Alabama.

    Mayra Ocasio

    May 14, 2014 at 11:15 pm

    • I have everything you need- I am in Northern VA-
      I have a Large American French Tool Press 53 x 30 with blankets ($9500), drying racks, flats files, a vacuum table, work tables, a huge hotplate, inks , brayers, papers. Etc.
      I am downsizing and need to get rid of everything- Sob.

      I will send pictures if you are interested.

      jane dicicco

      March 22, 2017 at 3:15 pm

    • I’m interested in purchasing either press. Can u send additional photos? Specifically photos of the roller/cylinders? Does this price include any scraper bars? If so, what size? Also, do you know if the motors are functional? Do you know if the press motor can be fitted with a hand driven wheel? Do you have specs for this? Can you tell me what the bed is composed of? composite or steel? I am located in PA and could pick up. I can be reached at wollmering2000@hotmail.com. thanks!

      Melissa

      May 23, 2014 at 6:10 pm

  187. I am in Canada, Ontario and looking for a used printing press. Who or where could one go? Thanks!

    Rebecca

    May 26, 2014 at 6:03 pm

  188. I have an Ettan press MS-3 for sale can someone tell me where to post it?

    Julie

    June 3, 2014 at 12:08 am

    • I am in Orange County CA

      Julie

      June 3, 2014 at 12:10 am

    • Hello Julie, what’s the size of the plate and the sale price?
      Thank you,
      Mayra

      mayraocasio

      June 4, 2014 at 2:17 pm

    • Is the press still available? I live in San Diego.

      Bruce Ritayik

      July 1, 2014 at 4:20 pm

    • Is the press still available?

      brcadmritk

      July 1, 2014 at 5:35 pm

    • Hi Julie,
      Is your press still for sale?

      Reem

      September 3, 2015 at 8:25 pm

  189. what is the price?

    Carolyn

    June 4, 2014 at 4:04 pm

    • $2900.00 I have pictures if you are interested.

      Julie

      June 4, 2014 at 5:11 pm

    • Can you post some pics?

      mayraocasio

      June 24, 2014 at 10:10 pm

  190. Plate size is 24 x 48.75 x 75

    Julie

    June 4, 2014 at 10:11 pm

  191. How about $2000.00?

    Julie Hergenrother

    June 24, 2014 at 7:21 pm

  192. I have pictures but I am ubable to post them here if you give me an email I am happy to send them to you I am even willing to be flexible on the price.

    Julie Hergenrother

    June 24, 2014 at 10:34 pm

  193. if you put your mouse over my name it should show a pic of the press

    Julie Hergenrother

    June 24, 2014 at 10:40 pm

  194. mayraocasio

    June 25, 2014 at 3:21 am

  195. No the press has not been sold and it is located in Orange County CA

    Julie Hergenrother

    July 1, 2014 at 11:15 pm

    • I am very interested. Can you send me some pix at goldfang@cox.net? How old is the press and what condition is it in and what is your firm price. I live in San Diego so it would be an easy drive to Orange County.
      Also what form of payment would you accept, cash, check, money order or certified check?

      brcadmritk

      July 2, 2014 at 12:19 am

    • Hi Julie. Is your Ettan press still available? Thank you.

      James

      October 26, 2014 at 12:25 pm

    • Hi – Do you still have your press? I’m in San Diego.

      Ellen

      January 2, 2015 at 2:07 am

  196. If the press hasn’t sold I would like to buy it. I will be in SoCal in mid August and I could arrange my own shipping to Thailand. gonebeyond@hotmail .com — Tony Milton

    Paul Anthony Milton

    July 3, 2014 at 10:20 am

  197. We have a 30 x 16 Charles Brand hand-crank floor press for sale in Springfield, Missouri. It was purchased in L.A. in the 1970s, used for etchings for many years, and is in excellent condition. We will include felts and miscellaneous inks, grounds, rosin. Pick-up only. $1100. or make offer. email me and I’ll send pictures.

    Sybil Snowden

    August 2, 2014 at 8:33 pm

    • Sybil– I’d like to see pictures and learn more about your press for sale.

      Apple Terrier

      August 7, 2014 at 8:32 pm

      • Apple – Thank you but the press is sold.

        Sybil Snowden

        August 27, 2014 at 1:10 pm

  198. Manual litho press, Wepplo (Minnesota Custom Fabricators) Blaine, Minnesota. Table 29″ x 38″. Functionnal
    come with 6 litho stones :1 (18 x 25 x 3) 1 (14 x18) 4 small (10x12x 3), 2 ink rolls and levigator. All for 4000$.
    Located in Montréal, Québec, Canada.

    Jocelyn Laplante

    August 29, 2014 at 5:52 pm

  199. looking for vandercook table top proof letterpress or similar .. also seeking C&P with foot pedal , within 600 miles of Florida

    k66stewart@yahoo.com

    paperjam

    October 16, 2014 at 2:54 am

  200. Looking for a Table Top etching press. could pull a 22″x30″ of it. Located in Montreal Canada. Thank you

    marzir

    December 15, 2014 at 1:53 am

    • Are you still looking? I have a press for sale located in downtown Montreal. So you could come see for yourself. Email rakostiuk@hotmail.com for pics or questions. Thanks!

      Alex

      Alex kostiuk

      September 14, 2015 at 2:20 pm

  201. Looking to buy an etching press in Florida. Anyone has some news?

    mayraocasio

    February 8, 2015 at 2:51 pm

    • I’m selling a 16″ X 30″ Charles Brand Etching press and I’m in Florida. The press is $2,500.00 and in excellent condition. You can email me at annawalk2@gmail.com for pictures and questions.

      Anna

      February 9, 2015 at 10:14 pm

  202. I am selling my Charles Brand etching press. It is 16″ X 30″ in excellent condition and has been well maintained. It does not have blankets. It does have some of the original Brand paperwork from when the press was first bought. I will not ship or deliver. You have to pick it up from Florida and you will need to bring help to lift it. Price is $2,500.00. Email for pictures and questions annawalk2@gmail.com

    Anna

    February 9, 2015 at 10:10 pm

    • The press has been sold

      Anna

      April 14, 2015 at 8:59 pm

  203. I’m looking for a tabletop Poco Proofing Press. Doug 303 797-7797

    Doug

    March 4, 2015 at 1:15 am

  204. I am salling Parks Litho press , bed size is 25.5 x 37″ It’s a New cherry wood bed.
    Working excellent and perfect! Asking price is $2500
    Location is DUMBO section of Brooklyn NY.
    Email me to mrbando@earthlink.net I will send you photos

    Rica

    March 31, 2015 at 9:41 pm

    • I am selling a cast iron engraving press made by M.M. Kelton, New York, in the mid to late 1850’s, known as the “spyder” model because of the five handles radiating from the hub that turns the top cylinder. It was originally used to print U.S. government bank notes and certificates, and was later owned and used by acclaimed NYC printmaker Irwin Hoffman as an etching press. It was purchased from him in 1976, and has been displayed in a heated art gallery ever since. It is in original working condition. The top cylinder is 20″ long, and the soapstone (?) bed is 22″ x 40″. The frame is cast: M M Kelton, 124 Baxter St. , NYC. Asking price is $3000. Email me to cabinboy12ci@gmail.com for pictures and questions.

      Glenn

      April 10, 2015 at 5:46 pm

      • M. M. Kelton press above is located in Vermont. Price reduced to $2500.

        Glenn

        April 25, 2015 at 10:19 pm

    • I am selling a cast iron engraving press made by M.M. Kelton, New York, in the mid to late 1850’s, known as the “spyder” model because of the five handles radiating from the hub that turns the top cylinder. It was originally used to print U.S. government bank notes and certificates, and was later owned and used by acclaimed NYC printmaker Irwin Hoffman as an etching press. It was purchased from him in 1976, and has been displayed in a heated art gallery ever since. It is in original working condition. The top cylinder is 20″ long, and the soapstone (?) bed is 22″ x 40″. The frame is cast: M M Kelton, 124 Baxter St. , NYC. Asking price is $3000. It is located in Vermont. Email me to cabinboy12ci@gmail.com for pictures and questions.

      Glenn

      April 10, 2015 at 5:49 pm

  205. i have a heidelberg windmill – printing press for sale. red ball. great condition. in Ojai ca. about 1 hour north of la.
    also lead type. various kind one cabinet full…
    claude@design-etc.com

    Claudia Wilson

    April 15, 2015 at 4:02 am

  206. I’m selling a Glen Alps manual press Red. Excellent condition located on Whidbey Island, WA 98249. The studio it is in is being sold. It was my Mom’s press, Betty Rayle, she passed away prematurely last year. Good home wanted. Thank you, Julie

    jburgess10@att.net

    Julie Burgess

    June 27, 2015 at 2:18 am

  207. I am looking for an etching press about 18-24″ wide. Is there one for sale on this forum?
    Thanks.
    Reem

    Reem

    September 3, 2015 at 8:26 pm

  208. Looking to buy an etching press in Florida. Anyone has some news?

    Mayra Ocasio

    September 4, 2015 at 9:23 pm

    • I can ship my press to Florida to your door no problem. I actually work in the transport business so I can have it moved for cheap. Email rakostiuk@hotmail.com for pics and questions if you’re interested.

      Alex kostiuk

      September 14, 2015 at 2:15 pm

  209. PRAGA etching press in almost perfect condition.

    Also included is a custom wood stand that contains 2 hand ink rollers. They are 2 different gradients for applying the ink. These high quality rollers are valued new minimum $350ea plus tax (over $700 total).

    Press was used by an elderly professional artist who took very good care of it until her passing.

    Table top is 40″ x 30″

    Roll diameter 6.5″

    Handwheel diameter is 25″

    Overall dimensions are 48 X 36 X 52″ high with the stand.

    Weighs approximately 400 pounds.

    This high quality press was manufactured in Scarborough, Ontario.

    The top cranks of this model were constructed with a chain and gears to insure perfect even pressure across the whole roll. You adjust one side and the other side automatically adjusts to be exactly the same.

    Asking $5000 for all.

    Alex kostiuk

    September 12, 2015 at 4:45 pm

  210. I’m selling a 30″ x 42″ Praga floor mount etching press for $4,200.00. It has never been used and is still on the original shipping base. Comes with several different wool blankets, also unused. Pick up is local only in SE Wisconsin or you may arrange grade level pick up through a commercial shipper at your expense. Also have a Valad 27.5″ x 36″ unused hot plate available for $500.00. It’s really never been used. Not once. No ink stains, no nothing and still on its original shipping base. The woman who originally bought it had grandiose plans to become a Door County bon vivant while churning out highly sought after etchings. That didn’t happen and I ended up with it. I’m no artist and it seemed like a tedious way to make pizza crusts so I’m selling it as new, never used.

    Mike Paul

    September 17, 2015 at 6:06 pm

  211. I am now selling my handheld pocket etching presses that I designed and have been using for 6 years. Starting at $69. Good for pressing drypoint, monoprint, linocut and woodcut prints. Great for travelers and students.

    Diana

    November 29, 2015 at 5:53 am

  212. I am now selling my handheld pocket etching presses that I designed and have been using for 6 years. Starting at $69. Good for pressing drypoint, monoprint, linocut and woodcut prints. Great for travelers and students. Visit my site http://www.printmakingpress.com

    Diana

    November 29, 2015 at 5:55 am

  213. For SALE !!!!! Etching Press !!!
    Wright Combination Press. Does etching, litho, intaglio, relief and more.
    I am in Columbia, SC. But am more than happy to have it placed on a pallet for shipping to your location. You handle the shipper.
    $3,950.
    803-381-2494

    Keller

    December 8, 2015 at 11:10 pm

    • Good morning ,
      Hopefully this question isn’t too repetitive. What’s the size of this press and how soon do you plan to sell it? Thanks!

      zebirdhouse

      December 9, 2015 at 5:35 pm

  214. For SALE!!! Etching Press.

    Selling a Barenaked Press, made in Arizona. Press is currently located in Chatham, ON. Press bed measures 36″ x 60″. The press is currently on casters which makes it very portable in the studio and comes apart in 3 separate pieces for easy moving and ensures that is can fit through any standard doorway. The press has a very high gear ratio for smooth and easy printing on the 5 point captain wheel crank.

    I also have 2 sets of blankets to go with it and wooden storage units that were built to go under the press if you would like them (free of charge).

    $5000 CDN.

    contact me via email at vanessaccornell [at] gmail [dot] [com]

    Vanessa Cornell

    May 3, 2016 at 2:34 am

    • hi, I know this is several months from when you posted but is the press still for sale?

      Bob Fleming

      December 15, 2016 at 3:12 am

  215. I am looking for a tabletop etching press capable of pulling 20″ by up to 42″ prints. Bench-mount is okay too. Price around 3k max. I am located in Montana and willing to drive to Washington, Oregon, Idaho or British Columbia to pick it up myself. Email me if you have something or know of one.

    Maureen Shaughnessy

    May 21, 2016 at 4:59 pm

  216. Sturgess CP04 Etching Press for sale 18×48 good condition. Vancouver B.C. $1900.00 CDN email sladak@telus.net for pictures.

    sladak2012

    June 25, 2016 at 8:39 pm

  217. I have a Sturges CP 04 18 x 48 Press for sale. Located in Vancouver B.C. $1900.00cdn. Great condition. Please email me for pictures. sladak@telus.net

    sladak2012Safana

    June 28, 2016 at 10:24 pm

    • Is it possible this press is still available

      Nen Ja,es

      February 22, 2017 at 12:25 am

  218. Nice!

    Tobias Schock

    August 14, 2016 at 8:51 pm

  219. Looking for a 16″ rubber or polyurethane roller in good condition. Email to eunice.edwards@sbcglobal.net

    john Edwards

    September 19, 2016 at 11:04 am

  220. NY visual artist ( FROM YOHO STUDIOS)
    i am looking for a printmaking press> or a
    Combination Press. Does etching, litho…..wood cuts…. relief and more

    Humberto Grullon

    October 10, 2016 at 7:14 pm

    • Large American French Tool Etching Press – appx 53 x 33 inch press bed
      perfect working order; used by a single artist over the past 17 years right outside Washington, D.C.

      Asking $9500 OBO
      You move, I’ll help.

      jane dicicco

      March 22, 2017 at 3:08 pm

  221. I’m in the San Francisco Area and looking for an aquatint box used at a good price condition doesn’t matter. eunice.edwards@sbcglobal.net

    john Edwards

    December 15, 2016 at 11:19 pm

  222. Laguna Etching Press Company Model 2648 FOR SALE

    Bed of press is 26×48
    press measures 50.25 wide by 49 high by 32.25 deep.

    Blue hand cranked press. Beautiful condition with only a few cosmetic blemishes on frame of press. Comes with blanket for bed, cover, and 3 wash containers, all different sizes.

    For sale in San Clemente Ca, pick up only.

    Asking $5,000 OBO

    can email pictures or set up a time to come see the press, and can also arrange for pick up or freight.

    Lauren Boissevain

    December 29, 2016 at 11:09 pm

    • Is this press still available?

      Jonathan

      December 30, 2017 at 3:38 am

  223. magnificent points altogether, you just gained a logo new reader. What may you recommend about your publish that you made some days ago? Any certain?

    January Gear

    February 1, 2017 at 5:27 pm

  224. I am downsizing my home/studio and need to sell everything.
    I have a floor model American French Tool etching Press- 53 x 30 with blankets. Well taken care of by one artist, then myself, and VERY lightly used for the past 5 years. It is in perfect working condition.
    I have many other printmaking supplies: drying racks, paper trays, flats files, a vacuum table, work tables, a huge hotplate, inks , brayers, papers.

    asking $9500 for press, other items negotiable.

    Right outside D.C

    I need you to pick up but I’ll help

    March 22, 2017 at 3:15 pm

    jane dicicco

    March 22, 2017 at 3:26 pm

  225. I’m in the Los Angeles area and am looking for a cylinder etching press that can be adjusted for relief. Thank you!

    Jonathan

    December 30, 2017 at 3:39 am

  226. I’m in the Los Angeles area and am looking for a cylinder etching press that can be adjusted for relief. Thank you!

    Jonathan

    December 31, 2017 at 8:02 pm

  227. I’m located in Montreal (Quebec Canada) and I’m selling a Wepplo (Minnesota custom Fabricators) litho press, 29 x 38 inches bed, working condition, including 5 small and 2 medium size stones. Any reasonable offer will be considered. Thank you.

    pilisalutz

    January 25, 2018 at 11:55 pm

  228. I’m located in the Saint Louis area and I am selling a Dickerson Combination Press in working condition with accessories. Any reasonable offer will be considered- We just really want it to go to a place where it will be used. Thank you!

    M

    June 13, 2018 at 11:37 pm

  229. I

    samiragdisis

    June 16, 2018 at 11:43 pm

  230. I am in Racine, Wisconsin (between Chicago and Milwaukee) and am liquidating some equipment. I have two large rollers in boxes in good condition for sale ($350 each), a litho press on rolling cart ($1200), a 4-gallon vertical etching tank ($58), and an exposure unit approximately 50×60 inches that needs a little TLC but works ($200). Detail descriptions and pictures available on request. Also, handle for hand roller approximately 12″ needs new roller and a 24″ roller with damage ($95) All shipping expenses are the responsibility of the buyer.

    samiragdisis

    June 16, 2018 at 11:50 pm

  231. Looking for 24” x 7/12” (or larger diameter) rubber roller in ex+ shape for:
    Wright 49056 Etching/Combo printing press.
    Recommendations for a good rebuilder in the South West also helpful.
    Thanks.

    Lance Child

    August 2, 2018 at 11:57 pm


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: